HP Enterprise Cluster Master Toolkit User Guide (5900-2131, December 2011)

If the choice is to store the configuration files on a local disk, the configuration must be replicated
to local disks on all nodes configured to run the package. Here the Sybase ASE binaries reside
on the local storage. If any change is made to the configuration files, the file must be copied to all
nodes. The user is responsible to ensure the systems remain synchronized.
Shared Configuration
This is the recommended configuration. Here, the configuration and database files are kept on
shared disks (but the Sybase ASE binaries can be on the local storage). Since the configuration
files and data files reside on a shared location, there is no additional work to ensure all nodes
have the same configuration at any point in time. Another alternative setup is to put the Sybase
ASE binaries too on the shared location along with the configuration and database files.
Sybase supports multiple ASE instances running on the same node simultaneously. This allows the
system administrator the ability to move one instance from its own node while leaving another
instance up. Each node can potentially run several instances. Each Sybase ASE Package corresponds
to a separate Sybase ASE instance with its own ASE_SERVER instance name, unique volume groups,
logical volume and file system for storing ASE binaries, configuration files, data files, system
databases, log files and so on. This means the configuration information for each instance must
be identical for each node that will be configured to run that instance. See Building an HA Cluster
Configuration in the Serviceguard user manual available at:http://www.hp.com/go/
hpux-serviceguard-docs-> HP Serviceguard for information on volume group creation and logical
volume management.
NOTE: As previously stated, shared configuration can be stored on a local disk. If the choice is
to do this, it is the user's responsibility to ensure the data is propagated to all the nodes, and is
consistently maintained across the nodes. A disadvantage of storing the configuration on local
disks is that this can increase the chance of the configuration for a database instance becoming
inconsistent if changes are made to the configuration in one node. This configuration data is not
distributed to all nodes that can run that database instance.
It is therefore recommended that the master database and other ASE system database files -
likemaster.dat , sysprocs.datand sybsysdb.dat be on shared disk.
The user is adviced to get the appropriate license for this type of setup. In case of a license that is
server specific, each node will require a license to be generated with the corresponding MAC of
that node. In case of local configuration, the license for each node can be separately put on the
corresponding node under the $SYBASE/$SYBASE_SYSAM2/licenses directory. In case of a
shared configuration, ensure that both nodes can access the corresponding license in the same
path.
However, in case of a local configuration, note that the Sybase ASE instance specific files MUST
be identical on all nodes; and in a shared configuration, all files must be on shared storage and
be accessible from any one node at any given time.)
Setting up the Application
NOTE: This chapter assumes that Sybase ASE has already been installed in /home/Sybase ASE
on all nodes in the cluster, and that shared storage has been configured.
1. Make sure all database instances in the cluster have unique names (as identified by the
user-defined variable 'ASE_SERVER' in the package configuration file). This can be done at
the time of configuring the ASE server processes, with entries made in the <ASE_SERVER.cfg>
file while configuring with the default configuration tool, or in the
$SYBASE/$SYBASE_ASE/init/sample_resource_files/srvbuild.adaptive_server.rs and similarly
for the other servers.
Setting up the Application 61