HP Enterprise Cluster Master Toolkit User Guide (5900-2131, December 2011)

The following is an example of specifying Sybase ASE specific variables:
ecmt/sybase/sybase/TKIT_DIR /tmp/SYBASE0
ecmt/sybase/sybase/SYBASE /home/sybase
ecmt/sybase/sybase/SYBASE_ASE ASE-15_0
ecmt/sybase/sybase/SYBASE_OCS OCS-15_0
ecmt/sybase/sybase/SYBASE_ASE_ADMIN sybase
ecmt/sybase/sybase/SALOGIN sa
ecmt/sybase/sybase/SAPASSWD somepasswd
NOTE: Keep this commented if the password for the administrator is not set. Along with
other package attributes, this password is also stored in the Cluster Database. If users are not
restricted access based on their roles, this password can be viewed by unauthorized users
using the cmviewcl command. It is highly recommended to grant access to users based only
on their roles in managing the cluster and packages. See “Configuring Access Roles” (page 67)
in this chapter for more details on configuring Role Based Access (RBA).
ecmt/sybase/sybase/ASE_SERVER SYBASE0
ecmt/sybase/sybase/ASE_RUNSCRIPT /home/sybase/ASE-15_0/install/RUN_SYBASE0
ecmt/sybase/sybase/USER_SHUTDOWN_MODE wait
The default is "wait". If the user requires that the ASE instance should abort immediately and
do an unclean shutdown, this should be specified as "nowait".
ecmt/sybase/sybase/MONITOR_INTERVAL 5
ecmt/sybase/sybase/TIME_OUT 30
ecmt/sybase/sybase/RECOVERY_TIMEOUT 30
ecmt/sybase/sybase/MONITOR_PROCESSES dataserver
ecmt/sybase/sybase/MAINTENANCE_FLAG yes
Define the volume groups that are used by the Sybase ASE instance. File systems associated
with these volume groups are defined as follows:
vg /dev/vg00_SYBASE0
vg /dev/vg01_SYBASE0
Define the file systems which are used by the Sybase ASE instance. Note that one of these
file systems must be the shared file system/logical volume containing the Sybase ASE home
configuration information ($SYBASE_HOME). The name of the instance is used to name the
volume groups, logical volumes and file systems.
fs_name /dev/vg00_SYBASE0/lvol1
fs_directory /SYBASE0
fs_type "ext3"
fs_mount_opt "-o rw"
Define the service related parameters. The service name should include the Sybase ASE
instance name (that is ${ASE_SERVER}). In the following example, since there is only one
service for this package, the ${ASE_SERVER} (that is SYBASE0) is assigned to the 'service_name'
parameter.
service_name SYBASE_${ASE_SERVER}
service_cmd
"/opt/cmcluster/conf/scripts/ecmt/sybase/tkit_module.sh
sybase_monitor"
service_restart "-r 3"
The service restart counter can be reset to zero for this service by using Serviceguard command
:cmmodpkg. The service restart counter is incremented each time the service fails. It is used
66 Using the Sybase ASE Toolkit in a Serviceguard Cluster on HP-UX