Managing HP Serviceguard A.11.20.20 for Linux, March 2014

NOTE: Configuring monitored_subnet_access as FULL (or not configuring
monitored_subnet_access) for either of these subnets will cause the package configuration
to fail, because neither subnet is available on all the nodes.
7.7.5.3 Creating Subnet-Specific Package Control Scripts
Now you need to create control scripts to run the package on the four nodes.
IMPORTANT: In a cross-subnet configuration, you cannot share a single package control script
among nodes on different subnets if you are using relocatable IP addresses. In this case you will
need to create a separate control script to be used by the nodes on each subnet.
In our example, you would create two copies of pkg1’s package control script, add entries to
customize it for subnet 15.244.65.0 or 15.244.56.0, and copy one of the resulting scripts to
each node, as follows.
7.7.5.3.1 Control-script entries for nodeA and nodeB
IP[0] = 15.244.65.82
SUBNET[0] 15.244.65.0
IP[1] = 15.244.65.83
SUBNET[1] 15.244.65.0
7.7.5.3.2 Control-script entries for nodeC and nodeD
IP[0] = 15.244.56.100
SUBNET[0] = 15.244.56.0
IP[1] = 15.244.56.101
SUBNET[1] =15.244.56.0
7.8 Reconfiguring a Package
You reconfigure a package in much the same way as you originally configured it; for modular
packages, see “Configuring Packages and Their Services ” (page 169); for older packages, see
“Configuring a Legacy Package” (page 233).
The cluster can be either halted or running during package reconfiguration, and in some cases
the package itself can be running; the types of change you can make and the times when they
take effect depend on whether the package is running or not.
For more information, see “Allowable Package States During Reconfiguration ” (page 242)
7.8.1 Migrating a Legacy Package to a Modular Package
The Serviceguard command cmmigratepkg automates the process of migrating legacy packages
to modular packages as far as possible. Many, but not all, packages can be migrated in this way;
for details, see the white paper Package Migration from Legacy Style to Modular Style at http://
www.hp.com/go/hpux-serviceguard-docs (Select HP Serviceguard -> White Papers).
NOTE: The cmmigratepkg command requires Perl version 5.8.3 or higher on the system on
which you run the command.
7.8.2 Reconfiguring a Package on a Running Cluster
You can reconfigure a package while the cluster is running, and in some cases you can reconfigure
the package while the package itself is running; see “Allowable Package States During
240 Cluster and Package Maintenance