Using NFS as a file system type with HP Serviceguard A.11.20 on HP-UX and Linux

9
– Step 6: Apply the package configuration file.
truck:/>cmapplyconf -v -P pkg.ascii
Begin package verification...
Checking existing configuration ... Done
Attempting to add package NFSPkg.
Validating package NFSPkg via
/etc/cmcluster/scripts/mscripts/master_control_script.sh ...
Waiting for up to 1200 seconds for the validation.
Validation for package NFSPkg succeeded via
/etc/cmcluster/scripts/mscripts/master_control_script.sh.
Maximum configured packages parameter is 300.
Configuring 1 package(s).
Adding the package configuration for package NFSPkg.
Modify the package configuration ([y]/n)? y
Completed the cluster update
– Step 7: Start the cluster if it is not already running. Run the package.
truck:/>cmrunpkg NFSPkg
Running package NFSPkg on node blocks
Successfully started package NFSPkg on node blocks
cmrunpkg: All specified packages are running
– Step 8: Verify that the package is up and running.
truck:/>cmviewcl -p NFSPkg
PACKAGE STATUS STATE AUTO_RUN NODE
NFSPkg up running enabled blocks