Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access EVA P6000 for Linux B.01.00.00

C smiseva.conf file
#################################################################
# #
# smiseva.conf CONFIGURATION FILE (template) #
# for use with the smispasswd utility #
# in the Metrocluster CA EVA Environment #
# #
# Note: This file MUST be edited before it can be used. #
# For complete details about SMI-S configuration for use #
# with Metrocluster CA EVA, consult the manual "Designing #
# Disaster Tolerant High Availability Clusters." #
# #
#################################################################
#
# This file provides input to the smispasswd utility, which you
# use to set up secure access paths between cluster nodes and
# SMI-S services.
#
# Edit this file to include the appropriate information about
# the Management Server and SMI-S services that will be used in
# your Metrocluster CA EVA environment.
#
# After entering all the desired information, run the smispasswd
# command to generate the security configuration that allows
# cluster nodes to communicate with the SMI-S services.
#
# Below is an example configuration. The data is commented out.
#
# Hostname/IP_Address User_login_name Secure Namespace Port
# IP_Address Connection (optional)
# ------------------- --------------- ---------- -------- ------
# 15.13.244.182 administrator y root/EVA 5989
# 15.13.244.183 administrator N root/EVA 5988
# 15.13.244.192 admin12309 y root/EVA
# SANMA04 admin y root/EVA
#
# The example shows a list of 4 Management Server and SMI-S data in
# the Metrocluster CA EVA environment. Each line represents a different
# Management Server and SMI-S data; fields on each line should be separated
# either by space(s) or tab(s). The order of fields is significant. The first
# field must be a hostname or IP address, the second field must be
# a user login name on the host. The third field must be 'y' or
# 'n' to use SSL connect. The next field must be the namespace
# of the SMI-S service. If the SMI-S service does not use the default port,
# then use the Port column to give the customized port number.
# For details of each field data, refer to the smispasswd
# man page, 'man smispasswd'.
#
# Note:
# Lines beginning with the pound sign (#) are comments. You cannot
# use the '#' character in your data entries.
#
# Enter your Managment Server and SMI-S services data under the dashed lines:
#
# Hostname/IP_Address User_login_name Secure Namespace Port
# IP_Address Connection (optional)
# ------------------- --------------- ---------- -------- ---------
40 smiseva.conf file