HP Serviceguard for Linux Version A.11.18 Deployment Guide, August 2008

As with Red Hat 5, the “development” option should be selected during installation if available.

NOTE: For SLES 10, if the cluster does not autostart please rename /etc/init.d/cmcluster.init to

/etc/init.d/cmcluster.

Additionally, there are several different requirements, listed below, for the installation of HP

Serviceguard for Linux on the Integrity platforms. These steps should be performed prior to running

the Serviceguard for Linux Installation script.

On Integrity, Serviceguard Manager requires the following Java JDK: BEA JRockit 5.0 R27.4 JDK for

Linux (Intel Itanium- 64-bit) or later version of JRockit 5.0.

1. To download BEA JRockit:

a. Go to http://commerce.bea.com/products/weblogicjrockit/jrockit_prod_fam-

bea.jsp.

NOTE: This link was valid at publication time. If the link no longer works, contact HP

Support.

b. Click on the link to download JRockit 5.0.

c. Agree to the License Terms.

d. Select the latest JRockit 5.0 available for Intel Itanium – 64-bit, for example:

JRockit 5.0 R27.5 JDK Linux (Intel Itanium - 64-bit)

2. To install BEA JRockit:

a. Go to the directory where you have downloaded the file. For example:

cd /tmp/sglx_install

b. Make the downloaded file executable, for example:

chmod +x jrockit-R27.5.0-jdk1.5.0_14-linux-ipf.bin

c. For Red Hat 5 Update 1, you must disable SELinux before installing JRockit,

otherwise bypass this step.

echo 0 > /selinux/enforce

d. Execute the installation file, for example:

./jrockit-R27.5.0-jdk1.5.0_14-linux-ipf.bin

e. Write down the path where the JDK gets installed, for example:

/root/jrockit-R27.5.0-jdk1.5.0_14

f. For Red Hat 5 Update 1, you must re-enable SELinux, otherwise bypass this step.

echo 1 > /selinux/enforce

For Serviceguard Manager on Integrity, HP SMH and Tomcat software must be acquired and installed

separately. They are not included on the Serviceguard for Linux CD.

1. To download HP SMH and Tomcat, get the latest HP Integrity Essentials Foundation Pack for

Linux Support Pack from HP.

a. Go to: http://www.hp.com.

b. Click on “Software & Driver Downloads”.

c. Select "Download drivers and software (and firmware)".

d. Enter your server model in the “for product” box.

e. Click “>>”.

f. Select your distribution.

g. Find "HP Integrity Essentials Foundation Pack for Linux Support Pack" on that page

and download the latest version. At publication time, the latest version of the

Support Pack was 4.27 (5 May 2008); the downloaded file is SupportPack-4.27-

sles10.ia64.tar.