Managing HP Serviceguard for Linux, Seventh Edition, July 2007

Cluster and Package Maintenance
Reviewing Cluster and Package Status
Chapter 7236
INTERFACE STATUS NAME
PRIMARY up eth0
PRIMARY up eth1
PACKAGE STATUS STATE AUTO_RUN NODE
pkg2 up running enabled ftsys10
Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover configured_node
Failback manual
Script_Parameters:
ITEM STATUS MAX_RESTARTS RESTARTS NAME
Service up 0 0 service2
Subnet up 0 0 15.13.168.0
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys10 (current)
Alternate up enabled ftsys9
Quorum Server Status
If the cluster is using a quorum server for tie-breaking services, the
display shows the server name, state and status following the entry for
each node, as in the following excerpt from the output of cmviewcl -v:
CLUSTER STATUS
example up
NODE STATUS STATE
ftsys9 up running
Quorum Server Status:
NAME STATUS STATE
lp-qs up running
...
NODE STATUS STATE
ftsys10 up running
Quorum Server Status:
NAME STATUS STATE
lp-qs up running