Metrocluster with Continuous Access EVA P6000 for Linux Version B.01.00.
Legal Notices © Copyright 2012 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license. The information contained herein is subject to change without notice.
Contents 1 Metrocluster with Continuous Access EVA P6000 for Linux Version B.01.00.00 Release Notes...............................................................................................4 Announcements........................................................................................................................4 What’s in this Version...............................................................................................................4 Features Supported in B.01.00.00..............
1 Metrocluster with Continuous Access EVA P6000 for Linux Version B.01.00.00 Release Notes Announcements Metrocluster with Continuous Access EVA P6000 for Linux is a Hewlett-Packard high availability product for Serviceguard customers requiring integrated disaster recovery solutions with HP EVA P6000 Series. Metrocluster with Continuous Access EVA P6000 for Linux Version B.01.00.
Support for Enhanced Asynchronous Replication Mode Metrocluster for Linux supports Enhanced Asynchronous write mode with P6000/EVA arrays. In this mode, the host receives an I/O completion acknowledgement after the data is successfully written to the disk based log/journal, which is used to queue the writes, which occurs after the data is written to the local cache. The asynchronous replication process reads the I/O from the journal and replicates it, using current methodologies, to destination P6000/EVA.
Support for failover polices site_preferred and site_preferred_manual Metrocluster for Linux supports Serviceguard failover policies: site_preferred and site_preferred_manual. These failover policies are supported for failover packages configured in a Metrocluster with sites defined in the Serviceguard cluster configuration file.
Compatibility Information and Installation Requirements Installation and configuration of Metrocluster with Continuous Access EVA P6000 for Linux must be done on all the cluster nodes (except arbitrator and Quorum Server nodes) as is done for any other Serviceguard package. To use Metrocluster with Continuous Access EVA P6000 for Linux, the following hardware and software must be installed and configured on each HP Proliant server node.
◦ RHEL 6.3 : tog-pegasus-2.11.0-3.el6.x86_64.rpm ◦ SLES11 SP1 : tog-pegasus-2.11.1-18.1.x86_64.rpm ◦ SLES11 SP2 : tog-pegasus-2.11.1-18.1.x86_64.rpm NOTE: • Configuring Metrocluster packages that use secure connections to the Management Server is not supported with the tog-pegasus version that is shipped with RHEL 6.1. The tog-pegasus is not available in SLES distributions. You can download tog-pegasus RPM from https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.
# rpm –i \ serviceguard-metrocluster-addons-B.01.00.00.00-0.rhel5.x86_64.rpm RHEL 6.x # rpm –i \ serviceguard-metrocluster-addons-B.01.00.00.00-0.rhel6.x86_64.rpm For SLES: # rpm –i \ serviceguard-metrocluster-addons-B.01.00.00.00-0.sles11.x86_64.
For other documentation on Metrocluster and the most current version of these documents including updates to this document, see the online versions of the documents available at http://www.hp.com/ go/linux-serviceguard-docs. Patches and Fixes in this Version There are no known fixes for Metrocluster with Continuous Access EVA P6000 for Linux version B.01.00.00 at the time of publication.
