Metrocluster with Continuous Access EVA P6000 for Linux Version B.12.00.00 Release Notes

Hardware Requirements
• HP P6000/EVA Disk Array and the corresponding firmware versions:
P6300/P6500
– XCS 1000X000, XCS 11001000, XCS 11200000
◦
◦ P6350/P6550
– XCS 11001000, XCS 11200000
• Host System
◦ HP Proliant Servers
• Windows Management Server (WMS)
For information on hardware requirements for the WMS, see the HP P6000 Enterprise Virtual
Array Compatibility Reference available at http://www.hp.com/support/manuals.
NOTE: This release note states the minimum version requirements for the Metrocluster product.
Contact your HP Storage Representative to ensure you have the most up-to-date and correct versions
for your HP P6000/EVA environment.
HP Software Requirements
HP ProLiant Servers specific requirements are:
NOTE: For latest certification information, see Serviceguard Disaster Recovery Products
Compatibility and Feature Matrix (Metrocluster Continuous Access EVA) – HPUX and Linux support
matrix available at www.hp.com/go/linux-serviceguard-docs.
• RHEL 5.4/RHEL 5.7/RHEL 5.8/RHEL 5.9/RHEL 5.10/RHEL 6.1/RHEL 6.2/RHEL 6.3/RHEL
6.4/RHEL 6.5/SLES 11 SP1/SLES 11 SP2/SLES 11 SP3
• Serviceguard version A.12.00.00
• Storage System Scripting Utility (SSSU)
• HP P6000 Command View (CV) and SMI-S EVA
CV EVA v9.4, SMI-S EVA v9.4◦
◦ P6000 CV v10.0, SMI-S EVA v10.0
◦ P6000 CV v10.1, SMI-S EVA v10.1
• OpenPegasus WBEM Services for Linux supports both secure and non-secure connections to
the Management Server. However, if you want to configure secure connections to the
Management server, then following are the minimum versions supported by the various Linux
distributions:
◦ RHEL 5.7 : tog-pegasus-2.9.1-2.el5_5.1.x86_64.rpm
◦ RHEL 5.8 : tog-pegasus-2.11.0-3.el5.x86_64.rpm
◦ RHEL 5.9 : tog-pegasus-2.11.0-2.el5.x86_64.rpm
◦ RHEL 5.10 : tog-pegasus-2.11.0-3.el5.x86_64.rpm
◦ RHEL 6.1: tog-pegasus-2.11.0-2.el6.x86_64.rpm
◦ RHEL 6.2 : tog-pegasus-2.11.0-2.el6.x86_64
Compatibility Information and Installation Requirements 7