Building Disaster Recovery Serviceguard Solutions Using Continentalclusters for Linux B.01.00.00

Table 5 Troubleshooting Continentalclusters Error Messages (continued)
ResolutionCauseSymptomsCommand/Component
Continentalclusters
configuration file.
(FQDN) cannot be
resolved amongst
the nodes in the
Continentalclusters.
• Ensure that the FQDNs are
resolvable amongs the nodes
in the Continentalclusters.• The SSH trust is not
established.
• Ensure that the SSH trust is set
up properly.
The cause must be one
of the following:
The following error message
is encountered while using
the cmcheckconcl
cmcheckconcl
• Set the AUTO_RUN flag in the
package configuration file to
NO.
• The AUTO_RUN flag
in the package
command: Error: “Global
package switching flag is set
• Ensure that the autorun
attribute is set to NO for
configuration file is
set to YES.
to true for package
<PackageName> on cluster
<ClusterName>”.
recovery or rehearsal
packages. Disable the flag
using the cmmodpkg –d
command.
• The global switching
for the package is
enabled using the
cmmodpkg -e
<package_name>
command. The value
is set to YES.
Ensure that the Volume Group
information for maintenance
Volume Group (VG) is
not configured for the
ccmonpkg package.
The cmclsentryd daemon
fails to start. The following
error message is logged in
cmclsentryd
mode is configured properly for
the /var/adm/cmconcl/ the ccmonpkg package. Verify
that the correct directory path is
logs/
specified for the state directory
cmclsentryd.log or
attribute
/var/ adm/cmcluster/
CONTINENTAL_CLUSTER_STATE_DIR
configuration file.
log/ ccmonpkg.log file:
“State dir is not mounted”.
Check the reason for the error in
the log file /var/adm/
The Continentalclusters
split brain prevention
module (vpaccrlb) is not
The cmrunpkg command
fails with the following error
message:
cmrunpkg/cmmodpkg
cmconcl/logs/
allowing the package
to start.
Error: Cannot start
package
<package_name>:Disallowed
checkpkg.log and fix
accordingly.
by the
ContinentalClusters
product
or
The cmmodpkg command
fails with the following error
message:
Error: Cannot enable
package
<package_name>:Disallowed
by the
ContinentalClusters
product
52 Troubleshooting Continentalclusters