Building Disaster Recovery Serviceguard Solutions Using Continentalclusters for Linux B.01.00.00

• SYSLOG - Append the specified message to the
/var/adm/syslog/syslog.log file. Note that the
text of the message is not placed in the syslog file, only
a notice from the monitor.
• TCP Nodename:Portnumber - send the specified
message to a TCP port on the specified node.
• TEXTLOG Pathname - append the specified message
to a specified text log file.
• UDP Nodename:Portnumber - send the specified
message to a UDP port on the specified node.
Any number of notifications can be associated with a given
alert or alarm.
PRIMARY_PACKAGE Clustername/Packagename
This is a pair of names— the name of a cluster as defined in the
Serviceguard cluster configuration ASCII file, followed by a slash (“/”),
followed by the name of the primary package as defined in the
Serviceguard package configuration ASCII file. Maximum size is 80
characters.
RECOVERY_GROUP_NAME name
This is a name for the set of related primary packages on one cluster
and the recovery packages on another cluster that protects the
primary packages. The maximum size is 31 bytes.
You create a recovery group for every package that must be started
on the recovery cluster in case of a failure on the primary cluster.
A PRIMARY_PACKAGE and RECOVERY_PACKAGE must be
associated with every RECOVERY_GROUP_NAME.
RECOVERY_PACKAGE Clustername/Packagename
This is a pair of names— the name of the recovery cluster as defined in
the Serviceguard cluster configuration ASCII file, followed by a slash
(“/”), followed by the name of the recovery package as defined in the
Serviceguard package configuration ASCII file. Maximum size is 80
characters.
CONTINENTAL_CLUSTER_STATE_DIR <directory location>
Absolute path to a file system where the Continentalclusters
state data is stored. The state data file system must be
created on a shared disk in the cluster and specified as part
of the monitor package configuration. The path specified
here must be created in all the nodes in the
Continentalclusters. The monitor package control script must
mount the file system at this specified path on the node it is
started. This parameter is optional if the maintenance mode
feature for recovery groups is not required. This parameter
is mandatory if the maintenance mode feature for recovery
groups is required.
REHEARSAL_PACKAGE ClusterName/PackageName
This is a pair of names — the name of a cluster as defined in the
Serviceguard cluster configuration ASCII file, followed by a slash ("/"),
followed by the name of the rehearsal package as defined in the
Serviceguard package configuration ASCII file. This variable is only
used for rehearsal operations. This package is started on the recovery
cluster by the cmrecovercl-r command.
58 Configuration file parameters for Continentalclusters