Smart Array 5300 Controller User Guide

Upgrading and Replacing Options
Figure 8-3: Unplugging the array accelerator board
To install the new array accelerator board:
1. Push the array accelerator board firmly into the DIMM connector socket.
2. Close the DIMM ejector levers to lock the array accelerator into place.
3. Reinstall the plastic retainer.
4. Reattach the heatsink.
Installation of the new array accelerator board is complete.
HP Smart Array 5300 Controller User Guide 8-3
HP CONFIDENTIAL
Writer: Kimberly Koch File Name: i-ch8 upgrading and replacing options.doc
Codename: SilverHammer Part Number: 135606-006 Last Saved On: 3/13/03 1:59 PM