Managing HP Serviceguard for Linux, Sixth Edition, August 2006

Building an HA Cluster Configuration
Creating the Logical Volume Infrastructure
Chapter 5 151
Disk /dev/sdc: 64 heads, 32 sectors, 4067 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 4067 4164592 83 Linux
Command (m for help): w
The partition table has been altered!
2. Respond to the prompts as shown in the following table to set a
partition type:
The following example of the fdisk dialog describes that the disk on
the device file /dev/sdc is set to Smart Array type partition, and
appears as follows:
# fdisk /dev/sdc1
Command (m for help):
t
Partition number (1-4): 1
HEX code (type L to list codes): 8e
Command (m for help): p
Disk /dev/sdc: 64 heads, 32 sectors, 4067 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 4067 4164592 8e Linux LVM
Prompt Response Action Performed
1. Command (m for help): t Set the partition type
2. Partition number (1-4):
1 Partition affected
3. Hex code (L to list codes):
8e Set partition to type to Linux
LVM
Command (m for help):
p Display partition data
Command (m for help):
w Write data to the partition
table