Managing HP Serviceguard for Linux, Sixth Edition, August 2006

Cluster and Package Maintenance
Reviewing Cluster and Package States with the cmviewcl Command
Chapter 7 217
Examples of Cluster and Package States
The following sample output from the cmviewcl -v command shows
status for the cluster in the sample configuration.
Normal Running Status
Everything is running normally; both nodes in the cluster are running,
and the packages are in their primary locations.
CLUSTER STATUS
example up
NODE STATUS STATE
ftsys9 up running
Network_Parameters:
INTERFACE STATUS NAME
PRIMARY up eth0
PRIMARY up eth1
PACKAGE STATUS STATE AUTO_RUN NODE
pkg1 up running enabled ftsys9
Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover configured_node
Failback manual
Script_Parameters:
ITEM STATUS MAX_RESTARTS RESTARTS NAME
Service up 0 0 service1
Subnet up 0 0 15.13.168.0
Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled ftsys9 (current)
Alternate up enabled ftsys10
NODE STATUS STATE
ftsys10 up running
Network_Parameters:
INTERFACE STATUS NAME
PRIMARY up eth0
PRIMARY up eth1
PACKAGE STATUS STATE AUTO_RUN NODE
pkg2 up running enabled ftsys10
Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover configured_node
Failback manual
Script_Parameters: