Serviceguard Disaster Recovery Products Compatibility and Feature Matrix (Metrocluster Continuous Access EVA) - HPUX and Linux

ManualsBrandsHP ManualsSoftwareHP Serviceguard for Linux

Serviceguard Disaster Recovery Products Compatibility and Feature Matrix (Metrocluster

Continuous Access EVA) - HPUX

NOTE: The tables on the following pages contain compatibility and features information for released versions of the HP Metrocluster with

Continuous Access EVA product.

NOTE: Certification of storage will only be valid till the published support life of the arrays itself.

Metrocluster

with Continuous

Access EVA

Version

Software on HP-

UX Server

SG Version

MCDREnable

r fileset

Version

EVA Platform &

Firmware

Software on

Windows

Management

Server

Feature(s)

A.05.01

(September ’10)

Documentation for

this product

version:

www.hp.com/go/

hpux-

serviceguard-docs

-> HP Serviceguard

Metrocluster with

Continuous Access

EVA

HP-UX 11i v2 or

HP-UX 11i v3

WBEM Services:

A.02.07

Evainfo v9.x

For HP-UX 11i

v2:

A.11.19

For HP-UX 11i

v3:

A.11.19 and

A.11.20

A.10.00

A.10.01

EVA3000, EVA5000:

 VCS v3.110 or VCS

v4.100

EVA 4000, 6000, 8000:

 XCS v5.1xx ,XCS

v6.110, XCS

v6.2xx

EVA 4100, 6100, 8100:

 XCS v6.110, XCS

v6.2xx

EVA4400:

 CV EVA v9.0.1

SMI-S EVA v9.0

 CV EVA v9.1

SMI-S EVA v9.1

 CV EVA v9.2

CV EVA v9.2.1

SMI-S EVA v9.2

 CV EVA v9.3

SMI-S EVA v9.3

 CV EVA v9.4

SMI-S EVA v9.4

 P6000 CV v10.0

Enhancements with this revision:

1. Support for Oracle 11gR2 (single

instance and RAC)

2. DRD support

3. Support for Manual Site switching

4. Oracle ASM support for Metrocluster for

RAC

5. Manageability improvements for

Metrocluster with Serviceguard

Manager

6. SADTA support of CVM/CFS 5.0.1

(Serviceguard Storage Management

Note: All four Metrocluster products share the same MCDREnabler fileset. Different Metrocluster products can be installed and configured in the same cluster. Only Metrocluster products with the same MCDREnabler version can coexist on the

same node and cluster.

Note: This table represents what has been certified and is supported. If other storage, firmware or software versions are available but not indicated in this table, it is currently not supported by Metrocluster with Continuous Access EVA. The table

will be updated when new versions are certified.

Note: CV EVA v9.0.1 supports the firmware versions VCS v3.110, VCS v4.100, XCS v6.110, XCS v6.2xx, XCS 09006000, XCS 09501x00 and XCS 0952x000. CV EVA v9.1, CV EVA v9.2 and CV EVA v9.2.1 support the firmware versions

VCS v3.110, VCS v4.100, XCS v6.110, XCS v6.2xx, XCS 09006000, XCS 09501x00, XCS 0952x000 and XCS 0953x000. CV EVA v6.0.2 supports VCS v3.110, XCS v5.1xx and XCS v6.110.

Refer to HP StorageWorks Enterprise Virtual Array compatibility reference for more information on the CV versions supported on different array firmware and for various Continuous Access combinations.

To download the matrix, go to http://www.hp.com/support/manuals. Then navigate as follows: Click “Storage Software” under “storage” category and then select “HP StorageWorks Command View EVA Software” under “Storage Device

Management Software”. The manuals page for HP Command View EVA is displayed. The EVA compatibility reference appears under the General reference category.

Note: Manual site switching is supported with Serviceguard A.11.20 only when PHSS_41225 or later is installed.

Note: P6000 CV v10.0 is supported only when patch PHSS_41660 or later is installed