Building Disaster Recovery Serviceguard Solutions Using Metrocluster with EMC SRDF

Figure 12 Configuring generic failover attributes
9. You are prompted to configure the attributes for a Metrocluster package. Ensure that all the
mandatory attributes (marked *) are accurately filled.
Figure 13 Configuring Metrocluster attributes
10. Enter the values for other modules selected in step 7.
11. After you enter the values for all modules, in the final screen review all the inputs for the various
attributes, and then click APPLY to apply the configuration.
Volume monitor configuration
The Volume Monitor must be configured as a service within a Metrocluster package. In case of
Site Controller packages, the volume monitor must be configured as a service in the workload
package(s) that uses VxVM or LVM storage volumes. For Example, to configure a service for
monitoring a single VxVM volume, /dev/vx/dsk/cvm_dg0/lvol2, at log level 3, with a polling
interval of 60 seconds, and prints all log messages to /log/monlog.log.
service_name service_vol_mon
service_cmd “/usr/sbin/cmvolmond -O /log/monlog.log -D 3
34 Configuring an application in a Metrocluster solution