Building Disaster Recovery Serviceguard Solutions Using Metrocluster with EMC SRDF

Figure 19 Selecting complex workload packages
10. Configure the attributes for a Metrocluster package. All the mandatory attributes (marked *)
are required.
Select the RDF mode and specify the Devicegroup attribute.
11. Review the service that is going to be monitor the complex workload packages. Skip to the
next step if no changes are required.
Figure 20 Configuring service module attributes
12. After the values for all the modules are entered, review all the inputs entered for the various
attributes in the final screen, and apply the configuration.
NOTE: Site controller package can also be created using the Package Easy Deployment feature
available in Serviceguard Manager version B.03.10. For more details, see Using Easy Deployment
in Serviceguard and Metrocluster Environments on HP-UX 11i v3 available at http://www.hp.com/
go/hpux-serviceguard-docs —> HP Serviceguard. In case of easy deployment, the Metrocluster
module parameters are auto-discovered.
Configuring the Site Controller package for the complex workload 47