Building Disaster Recovery Serviceguard Solutions Using Metrocluster with 3PAR Remote Copy for Linux B.01.00.00, July 2013

Figure 2 Creating Modular Package
4. If the product Metrocluster with 3PAR Remote Copy for Linux is installed, you will be prompted
to configure a Metrocluster package. Select the dts/mc3parrc module, and then click Next.
Figure 3 Selecting Metrocluster module
5. You will be prompted next to include any other toolkit modules. In case your application being
configured requires a Serviceguard toolkit, select the appropriate toolkit, otherwise move to
the next screen.
18 Configuring an application in a Metrocluster environment