Designing Disaster Recovery Clusters using Metroclusters and Continentalclusters, Reprinted October 2011 (5900-1881)

applications are running on the primary cluster may result in data
corruption.
Are you sure that the primary packages are not running and will not
come back, and are you certain that you want to start the recovery
packages [y/n]? y
cmrecovercl: Attempting to recover Recovery Groups from cluster
LACluster.
NOTE: The configuration file /etc/cmconcl/ccrac/ccrac.config for cluster
shared storage recovery exists. Data storage specified in the file for
this cluster will be prepared for this recovery process. If you choose
"n" - not to prepare the storage for this recovery process, make sure
that the required storage for this recovery process has been properly
prepared. Is this what you intend to do [y/n]? y
The Oracle RAC instance package can be started in sequence.
# cmrecovercl -g <recoverygroupname>
Option -g is used to start up the first instance package, wait until the disk arrays are synchronized
before starting up the second instance package.
If option -g is used with the command cmrecovercl, the following messages will be given
instead:
WARNING: This command will take over for the primary cluster
primary_cluster by starting the recovery package on the recovery cluster
secondary_cluster. You must follow your site disaster recovery procedure
to ensure that the primary packages on primary_cluster are not running
and that recovery on secondary_cluster is necessary. Continuing with
this command while the applications are running on the primary cluster
may result in data corruption.
Are you sure that the primary packages are not running and will not
come back, and are you certain that you want to start the recovery
packages [y/n]? y
cmrecovercl: Attempting to recover RecoveryGroup subsrecovery1 on cluster
secondary_cluster
NOTE: The configuration file /etc/cmconcl/ccrac/ccrac.config for cluster
shared storage recovery exists. If the primary package in the target
group is configured within this file, the corresponding data storage
will be prepared before starting the recovery package. If you choose
"n" - not to prepare the storage for this recovery process, make sure
that the required storage for the recovery package has been properly
prepared.
Is this what you intend to do [y/n]? y
Enabling recovery package racp-cfs on recovery cluster secondary_cluster
Running package racp-cfs\
Running package racp-cfs on node atlanta
Successfully started package racp-cfs on node atlanta
Running package racp-cfs on node miami
Successfully started package racp-cfs on node miami
Successfully started package racp-cfs.
Support for Oracle RAC Instances in a Continentalclusters Environment 123