Designing Disaster Recovery Clusters using Metroclusters and Continentalclusters, Reprinted October 2011 (5900-1881)

ManualsBrandsHP ManualsSoftwareHP Serviceguard Metrocluster with EMC SRDF

#### #### In addition to the cluster name, include a #### ####

#### #### domain name for the nodes in the cluster. #### ####

#### #### Node Names must be the same as those that #### ####

#### #### appear in the cluster configuration ASCII #### ####

#### #### file. A minimum of two member cluster needs #### ####

#### #### to be specified. You may configure one #### ####

#### #### cluster to serve as recovery cluster for #### ####

#### #### one or more other clusters. #### ####

#### #### #### ####

#### #### In the space below, enter the continental #### ####

#### #### cluster name, then enter a cluster name for #### ####

#### #### each member cluster, followed by the names #### ####

#### #### of all the nodes in that cluster.Following #### ####

#### #### the node names, enter the name of a monitor #### ####

#### #### package that will run the continental #### ####

#### #### cluster monitoring software on that cluster.#### ####

#### #### It is strongly recommended that you use the #### ####

#### #### same name for the monitoring package on all #### ####

#### #### clusters; "ccmonpkg" is suggested. #### ####

#### #### Monitoring of the recovery cluster by the #### ####

#### #### primary cluster is optional. If you do not #### ####

#### #### wish to monitor the recovery cluster, you #### ####

#### #### must delete or comment out the #### ####

#### #### MONITOR_PACKAGE_NAME and MONITOR_INTERVAL #### ####

#### #### lines that follow the name of the primary #### ####

#### #### cluster. #### ####

#### #### After the monitor package name, enter a #### ####

#### #### monitor interval,specifying a number of #### ####

#### #### minutes and/or seconds. The default is 60 #### ####

#### #### seconds, the minimum is 30 seconds, and the #### ####

#### #### maximum is 5 minutes. #### ####

#### #### #### ####

#### #### CLUSTER_NAME westcoast #### ####

#### #### CLUSTER_DOMAIN westnet.myco.com #### ####

#### #### NODE_NAME system1 #### ####

#### #### NODE_NAME system2 #### ####

#### #### MONITOR_PACKAGE_NAME ccmonpkg #### ####

#### #### MONITOR_INTERVAL 1 MINUTE 30 SECONDS#### ####

#### #### #### ####

#### #### CLUSTER_NAME eastcoast #### ####

#### #### CLUSTER_DOMAIN eastnet.myco.com #### ####

#### #### NODE_NAME system3 #### ####

#### #### NODE_NAME system4 #### ####

#### #### MONITOR_PACKAGE_NAME ccmonpkg #### ####

#### #### MONITOR_INTERVAL 1 MINUTE 30 SECONDS #### ####

#### #### #### ####

#### #### CONTINENTAL_CLUSTER_NAME ccluster1 #### ####

#### #### CONTINENTAL_CLUSTER_STATE_DIR #### ####

#### #### CLUSTER_NAME #### ####

#### #### CLUSTER_DOMAIN #### ####

#### #### NODE_NAME #### ####

#### #### MONITOR_PACKAGE_NAME ccmonpkg #### ####

#### #### MONITOR_INTERVAL 60 SECONDS #### ####

#### #### CLUSTER_NAME #### ####

#### #### CLUSTER_DOMAIN #### ####

#### #### NODE_NAME #### ####

#### #### MONITOR_PACKAGE_NAME ccmonpkg #### ####

#### #### MONITOR_INTERVAL 60 SECONDS #### ####

78 Designing Continentalclusters