HP Serviceguard Storage Management Suite A.04.00 Release Notes

the depot when it is first created, but it is harmless to register it again just to be sure it is visible
to other systems. To do this, enter:
swreg -l depot @ /var/depots/my_hpux_depot
NOTE: HP-UX 11i v3 and an HP Serviceguard Storage Management Suite for HP-UX 11i
v3 non-CFS bundle (T2774EB, T8684EB, or T8694EB) can be installed on each node as part
of a rolling upgrade. See “Upgrading to a Different SG SMS Bundle” (page 21) for more
information on rolling upgrades.
Installing HP-UX 11i v3 and an HP Serviceguard Storage Management Suite for HP-UX 11i
v3 CFS bundle (T2777EB, T8687EB, or T8697EB) can be performed with an online or an
offline upgrade depending on the version that is currently installed. See “Upgrading to a
Different SG SMS Bundle” (page 21) to determine if an online upgrade is supported, or an
offline upgrade is required.
4. Remove the following bundles from the HP-UX depot:
– B3929FB
– Base-VxFS-50
– Base-VxVM-50
– Base-VxTools-50
– VxFS-SDK-50
5. On each system to be updated, enter the following command:
update-ux -s depot_server:/var/depots/my_hpux_depot\
!Base-VXVM Base-VXFS Base-VxFS-51 Base-VxTools-51\
Base-VxVM-51 VxFS-SDK-51 !B3929EA !B9116EB <SG SMS Bundle>
If the HP-UX depot resides on the system being updated, the depot_server: portion of this
command can be omitted or you can specify the local hostname, otherwise depot_server:
is the hostname of the system where the my_hpux_depot resides followed by a “:” (colon).
This command will update your system to HP-UX 11i v3 with the HP Serviceguard Storage
Management Suite version A.04.00 for HP-UX 11i v3 bundle (which includes VxFS 5.1 SP1,
VxVM 5.1 SP1). The !B3929EA and !Base-VXVM entries on the command line ensure that
OnlineJFS and VxVM 4.l are not installed from the depot during the update.
When updating from an 11iv2 system containing VxVM 3.5, a message similar to the following
may be displayed:
WARNING: The following was found while selecting software:
- There are new revisions of SW available in the source that would update SW already installed on the system.
The newer revisions are not selected for installation. This will leave the incompatible old revision of SW on
the system. The affected SW is:
- VRTSfspro.FSPRO-PRG,r=4.1x replaces
VRTSfspro.FSPRO-PRG,r=3.5_2_ga08.006
- VRTSfspro,r=4.1x replaces VRTSfspro,r=3.5_2_ga08.006
- VRTSob.VEAS-FILESET,r=3.2.555.1 replaces
VRTSob.VEAS-FILESET,r=3.2.532.0.001
- VRTSob,r=3.2.555.1 replaces VRTSob,r=3.2.532.0.001
- VRTSobgui.VEA-FILESET,r=3.2.555.1 replaces
VRTSobgui.VEA-FILESET,r=3.2.532.0.001
- VRTSobgui,r=3.2.555.1 replaces VRTSobgui,r=3.2.532.0.001
- VRTSvlic.VLIC-RUN,r=3.02.23.1 replaces
VRTSvlic.VLIC-RUN,r=3.01.IA.002.010
- VRTSvlic,r=3.02.23.1 replaces VRTSvlic,r=3.01.IA.002.010
- VRTSvmdoc.VXVM-DOC,r=4.1.032 replaces
VRTSvmdoc.VXVM-DOC,r=3.5~IA.014
- VRTSvmdoc,r=4.1.032 replaces VRTSvmdoc,r=3.5~IA.014
- VRTSvmpro.VMPRO-PRG,r=4.1.020 replaces
VRTSvmpro.VMPRO-PRG,r=3.5~IA.014
- VRTSvmpro,r=4.1.020 replaces VRTSvmpro,r=3.5~IA.014
- VRTSvxvm.VXMS,r=4.1.032 replaces VRTSvxvm.VXMS,r=3.5~IA.014
- VRTSvxvm.VXVM-ENG-A-MAN,r=4.1.032 replaces
VRTSvxvm.VXVM-ENG-A-MAN,r=3.5~IA.014
- VRTSvxvm.VXVM-HELP,r=4.1.032 replaces
VRTSvxvm.VXVM-HELP,r=3.5~IA.014
- VRTSvxvm.VXVM-KRN,r=4.1.032 replaces
VRTSvxvm.VXVM-KRN,r=3.5~IA.014
- VRTSvxvm.VXVM-RUN,r=4.1.032 replaces
Compatibility Information and Installation Requirements 31