HP Serviceguard Storage Management Suite A.03.02 Release Notes (March 2012)

9. For new installations you will need to create an HP Serviceguard Storage Management Suite
cluster, see Managing Serviceguard for details on configuring the cluster. A high-level summary
of the steps involved in using the Cluster File System includes:
a. Create and start a Serviceguard cluster without a package using Serviceguard Manager
or Serviceguard commands (cmquerycl, cmcheckconf, cmapplyconf, cmruncl).
b. Configure and start the CFS system multi-node package SG-CFS-pkg using the
cfscluster command.
c. Create the disk groups and volumes on the CVM master node using Veritas Enterprise
Administrator (VEA) or VxVM / VxFS commands (vxdg, vxassist, newfs).
d. Add the CVM disk groups and CFS file systems to the Serviceguard cluster.
NOTE: Serviceguard Manager can be used to create modular CFS packages, but not
legacy CFS packages. For more information, see the Serviceguard Manager online help.
• Use the cmmakepkg -m sg/cfs_all /etc/cmcluster/cfspkg1.ascii
command to create a Modular CFS Package.
• Edit the package ascii file to configure the appropriate parameters for the package:
◦ checkconf /etc/cmcluster/cfspkg1.ascii
◦ cmapplyconf /etc/cmcluster/cfspkg1.ascii
◦ cmrunpkg package_name
• Once a CFS disk group and/or mount point is configured in a Modular package,
it is important to use the cmrunpkg command to start the package to ensure that
the Modular CFS packages monitor the disk group and/or mount points. Do not use
the cfsmount command or the HP-UX mount command to mount these filesystems.
NOTE: For more information on Improved CFS Integration in SG SMS version A.03.02
for HP-UX 11i v3 bundles, see the New Features for April 2011 Patch section in the
Serviceguard A.11.20 Release Notes and also see Managing Serviceguard 19th Edition,
both available at: www.hp.com/go/hpux-serviceguard-docs –> HP Serviceguard
e. Complete configuration.
— Create the application package configuration file and control script.
— Specify a same-node dependency on the Modular CFS package monitoring the disk
group and/or mount point to be used by the application in the package configuration
file.
— Verify, distribute, and apply the configuration using Serviceguard commands
(cmcheckconf, cmapplyconf).
f. Activate the multi-node packages and run the application packages using the cmrunpkg
command.
Software Components Installed with HP Serviceguard Storage Management Suite
The software components installed with the HP Serviceguard Storage Management Suite bundles
are listed in Table 7: “Software Components and Associated Bundles”.
Table 7 Software Components and Associated Bundles
Software Component Description
Bundle Tag: swlist -
l product command
output
TTTTTT
222222
777777
777777
765431
DDDDDD
Compatibility Information and Installation Requirements 29