HP Serviceguard Toolkits for Database Replication Solutions User Guide, March 2012

B Sample package configuration file for the DB2 HADR
standby package created using the combined method of
packaging
This section provides with a sample package configuration file for the DB2 HADR standby package
created using the combined method of packaging:
# **********************************************************************
# ****** HIGH AVAILABILITY PACKAGE CONFIGURATION FILE (template) *******
# **********************************************************************
# ******* Note: This file MUST be edited before it can be used. ********
# * For complete details about package parameters and how to set them, *
# * consult the Serviceguard manual.
# **********************************************************************
package_name hadr_standby
package_description "Serviceguard Standby Package"
package_type failover
node_name node1
script_log_file /etc/cmcluster/hadr_standby/$SG_PACKAGE.log
# ************ ECMT DB2 TOOLKIT PARAMETERS ************
ecmt/db2/db2/TKIT_DIR /etc/cmcluster/hadr_standby
ecmt/db2/db2/ALERT_MAIL_ID [e-mail]
ecmt/db2/db2/INSTANCE_NAME db2inst1
ecmt/db2/db2/PARTITION_NUMBER 0
ecmt/db2/db2/MONITOR_PROCESSES db2sysc
ecmt/db2/db2/MAINTENANCE_FLAG yes
ecmt/db2/db2/MONITOR_INTERVAL 30
ecmt/db2/db2/TIME_OUT 30
service_name db2_service
service_cmd "$SGCONF/scripts/ecmt/db2/tkit_module.sh db2_monitor"
service_restart none
service_fail_fast_enabled no
service_halt_timeout 300
service_name db2hadr_service
service_cmd "$SGCONF/scripts/tkit/db2hadr/tkit_module.sh db2hadr_monitor"
service_restart none
service_fail_fast_enabled no
service_halt_timeout 300
# ************ DB2-HADR TOOLKIT PARAMETERS ************
tkit/db2hadr/db2hadr/HADR_ROLE standby
tkit/db2hadr/db2hadr/HADR_DATABASE sample
tkit/db2hadr/db2hadr/ROLE_MANAGEMENT yes
tkit/db2hadr/db2hadr/HADR_IP 10.76.1.200:10.76.1.0
tkit/db2hadr/db2hadr/RESTORE_ROLE yes
Provide Client traffic IP and Interconnect traffic IP as package IP, if the package is configured to failover
to another node.
ip_subnet 10.76.1.0
ip_address 10.76.1.100
Provide VG name if the database is configured in a VG.
vg vg_standby
NOTE: To configure the package configuration file for a primary package, add primary as
the HADR_ROLE attribute. You must change the service_name attribute for both DB2 and DB2
HADR, if the primary package is also configured in the same cluster.
59