HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

154 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
Details in the lower part of the panel vary depending on the selected port's status.
■ iSCSI Port Status Details – Selected controller and port number
■ Link Status – Link is up or down
■ Qualified Name – iSCSI qualified name (IQN)
■ Link Speed – Actual link speed, in Gbit/sec
■ IP Version – IP addressing version; 4 for IPv4
■ IP Address – Port IP address
■ IP Mask – Port IP subnet mask
■ IP Gateway – Port gateway IP address
■ Service Port – iSCSI port number
■ Hardware Address – Port MAC address
SAS Host Port Status
The Host Port Status page shows a graphical representation of the host ports on each
controller, including a color-coded status for each port.
Figure 5-3 SAS Host Port Status Example
To display host port status information:
1. Select Monitor > Status > Advanced Settings > Host Port Status.
The status of each port is determined by the following color code:
■ Green – Host link is healthy
■ Orange – Host link is degraded
■ Red – Host link is down
2. To view information about a specific port, click the port.
The selected port is outlined in blue.