HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)
Chapter 5 Monitoring System Status 155
Details in the lower part of the panel vary depending on the selected port’s status.
■ Topology – Port connection type.
■ Speed – Actual link speed in Gbit per second per PHY lane.
■ Number of Active Lanes - The number of active PHY lanes and the number of
lanes in the port.
■ Port WWN – Port World Wide Name.
■ Health – Port status:
■ Healthy – All PHY lanes are active in the port.
■ Degraded – At least one PHY lane is inactive in the port.
■ SAS Chip Revision – Hardware revision level of the SAS expander processor in
the controller.
■ SAS Libraries Revision – Firmware revision level of the SAS libraries.
Disk Drive List
To view information about all disk drives in the storage system:
● Select Monitor > Status > Advanced Settings > Disk Drive List.
This page shows the total number of drives that:
■ Are installed
■ Are available (have Available status)
■ Contain leftover metadata from a previous virtual disk
■ Are down (failed)
It also shows the following information about each drive:
■ Status – Up if operational or Down if failed.
■ Size – Drive size in Gbyte.
■ Speed – Data transfer rate in Gbit per second.
■ Manufacturer – Drive manufacturer.
■ Model – Drive model number.
■ Revision – Drive firmware revision.
■ Node WWN – Drive node World Wide Name.
■ Serial Number – Drive serial number.
■ Encl.Slot – Enclosure number and slot number containing the drive.