HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

216 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
Affect of Changing the Date and Time
Resetting the storage system date or time might affect scheduled tasks. Because the
schedule begins with the start time, no schedules will run until the date and time are
set. If the system is configured to use Network Time Protocol (NTP), and if an NTP
server is available, the system time and date is obtained from the NTP server. To
manually change the date or time, see “Setting Date and Time” on page 37.
Deleting Tasks
Before you can delete a task, you must delete any schedules that run the task.
Errors Associated with Scheduling Tasks
The following table describes error messages associated with scheduling tasks.
Selecting Individual Events for Notification
You can configure how and under what conditions the storage system alerts you
when specific events occur. In addition to selecting event categories, as a Diagnostic
Manage user you can select individual events that you want to be notified of.
Note – Selecting many individual events can result in the system sending numerous
event notifications. Select the categories and individual events that are most
important to you.
Use this method when you want to track or watch for a specific event. You can also
use it to receive notification of specific functions being started or completed, such
as reconstruction or completion of initialization.
Table 7-2 Errors Associated with Scheduling Tasks
Error Message Solution
Task Already Exists Select a different name for the task.
Schedule Already Exists Select a different name for the schedule.