HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

220 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
To view the event log:
1. Do one of the following:
■ In the System Panel, click the icon.
■ In the menu, select Monitor > Status > View Event Log.
The event log page is displayed.
2. Click one of the following buttons in the Select Event Table To View panel to see
the corresponding events.
For a dual-controller system:
For a single-controller system:
The page shows up to 200 events for a single controller or up to 400 events for both
controllers. The events display in reverse chronological order (the most recent first).
The following information is displayed:
Button Description
Controller A & B Events Shows all events for both controllers. This is the default.
Controller A & B Critical/
Warning Events
Shows only critical and warning events for both
controllers.
Controller A Events Shows events logged by controller A.
Controller B Events Shows events logged by controller B.
Button Description
All Controller Events Shows all events. This is the default.
Controller Critical/Warning Events Shows only critical and warning events.
Field Description
Severity Level Critical, Warning, or Info (informational).
Date/Time Year, month, day, and time the event occurred.
Event Code A code that assists service personnel when diagnosing problems. For
event-code descriptions and recommended actions, see Appendix E.
Event Serial
Number
An identifier for the event. The prefix (A or B) indicates which
controller logged the event.
Message Information about the event.