HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

Appendix A SNMP Configuration 233
connUnitRevsTable Includes the following objects as
specified by the FA MIB2.2 Spec
connUnitRevsUnitId connUnitId of the connectivity
unit that contains this revision
table
Same as connUnitId
connUnitRevsIndex Unique value for each
connUnitRevsEntry
between
1 and connUnitNumRevs
See “External Details for
connUnitRevsTable” on
page 238
connUnitRevsRevId Vendor-specific string identifying
a revision of a component of the
connUnit
String specifying the code
version. Reports “Not
Installed or Offline” if
module information is not
available.
connUnitRevsDescription Description of a component to
which the revision corresponds
See “External Details for
connUnitRevsTable” on
page 238
connUnitSensorTable Includes the following objects as
specified by the FA MIB2.2 Spec
connUnitSensorUnitId connUnitId of the connectivity
unit that contains this sensor table
Same as connUnitId
connUnitSensorIndex Unique value for each
connUnitSensorEntry
between 1 and
connUnitNumSensors
See “External Details for
connUnitSensorTable” on
page 239
connUnitSensorName Textual identification of the sensor
intended primarily for operator
use
See “External Details for
connUnitSensorTable” on
page 239
connUnitSensorStatus Status indicated by the sensor ok[3], warning[4], or
failed[5] as appropriate for
FRUs that are present, or
other[2] if FRU is not
present.
connUnitSensorInfo Not supported Empty string
Table A-1 FA MIB 2.2 Objects, Descriptions, and Values (Continued)
Object Description Value