HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

26 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
System Panel
The System Panel at the bottom of each page includes system information, the
overall status of system components, controller information, and the Event Log
icon.
Figure 1-2 System Panel (FC Example)
The following information is shown:
■ System information – The system’s name and location.
■ Overall status – The Virtual Disk category shows the status of virtual disks in the
system. The Hardware category shows the status of I/O modules and enclosure
components. To see more detailed information, click the health value. An icon
shows the current status for each category:
■ – A green icon indicates that all virtual disks or hardware components are
operating normally.
■ – A red icon with an exclamation point indicates that at least one virtual
disk or hardware component is operating in a degraded state or is offline.
■ FC and SAS only. The controller’s node world wide name (WWN). For SAS,
both controller modules have the same node WWN.
■ The controller’s Ethernet management port IP address. A black arrow icon
identifies the controller you are accessing. If the Ethernet ports of both controller
modules are connected to the same network, clicking the IP address link for the
other controller opens a new browser window for login.
■ – Click this icon to display the Event Log page. See “Viewing the
Event Log” on page 171 for more information about the event log.