HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

296 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
249 Informational A valid license has been installed for
the specified feature. This event is
logged for each feature license
installed.
250 Warning A license could not be installed
(license is invalid).
Check license parameters against
what is allowed for the platform
and recreate the license using valid
parameters, then reinstall.
Review the readme file that came
with the license.
252 Informational Snapshot write data on the specified
master volume has been deleted.
256 Informational The specified snapshot has been
created but not committed. A commit
action is required before the snapshot
can be used.
257 Informational The specified snapshot has been
created and committed.
258 Informational The specified snapshot has been
committed and is ready for use.
259 Informational Inband CAPI commands have been
disabled.
260 Informational Inband CAPI commands have been
enabled.
261 Informational Inband SES commands have been
disabled.
262 Informational Inband SES commands have been
enabled.
263 Warning The specified drive spare is missing.
It was either removed or is not
responding.
Replace the specified drive.
264 Informational The link speed of the port bypass
circuit and interconnect mode has
been set to the default.
TABLE E-1 Event Descriptions and Recommended Actions (Continued)
Event
Code Event Type Description Recommended Action