HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

Chapter 3 Managing Storage 73
Disk Drive Status
To view information about the drives in a virtual disk:
1. Select Manage > Virtual Disk Config > Vdisk Configuration > Disk Drive Status.
For each virtual disk, the virtual disk panel shows a status icon; the name, RAID
level, size, number of disk drives, and number of volumes; and utility status, if any.
2. Select a virtual disk.
The Virtual Disk Drive List panel shows the following information about each drive
in the virtual disk:
■ Status – Up if operational or Down if failed
■ Size – Drive size in Gbyte
■ Manufacturer – Drive manufacturer
■ Model – Drive model number
■ Revision – Drive firmware revision number
■ Node WWN – Drive node World Wide Name
■ Serial Number – Drive serial number
■ Encl.Slot – Enclosure number and slot number containing the drive
■ Enclosure – Name of the enclosure containing the drive
The Dedicated Spares For Selected Virtual Disk panel shows the same information
about each spare assigned to the virtual disk. If no spares are assigned, the panel is
not displayed.