HP StorageWorks 2300 Modular Smart Array reference guide (500911-001, January 2009)

HP StorageWorks 2300 Modular Smart Array reference guide 79

External details for connUnitPortTable

Configuring SNMP event notification in SMU

1. Verify that the storage system’s SNMP service is enabled; see Changing management interface

settings.

2. Configure and enable SNMP traps; see Configuring SNMP notification.

SNMP management

You can manage storage devices using SNMP with a network management system such as HP System

Insight Manager (SIM), or HP Instant Support Enterprise Edition (ISEE). See their documentation for

information about loading MIBs, configuring events, and viewing and setting group objects.

In order to view and set system group objects, SNMP must be enabled in the storage system; see Enabling

management interfaces.

Enterprise trap MIB

The following pages show the source for the HP enterprise traps MIB, msa2000traps.mib. This MIB

defines the content of the SNMP traps that 2300 Modular Smart Array storage systems generate.

-- ----------------------------------------------------------------------------

-- MSA2000 Array MIB for SNMP Traps

-- $Revision: 11692 $

-- Confidential computer software. Valid license from HP required for possession,

-- use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer

-- Software, Computer Software Documentation, and Technical Data for Commercial

-- Items are licensed to the U.S. Government under vendor's standard commercial

-- license.

-- MSA2000traps MIB Revision

-- ==========================

-- Revision 1.1 2008/02/27

-- Initial revision

-- Revision 1.2 2008/03/18

-- Updated copyright notice

-- ----------------------------------------------------------------------------

MSA2000TRAPS-MIB

-- Last edit date: Feb 27th, 2008

DEFINITIONS ::= BEGIN

IMPORTS

enterprises

FROM RFC1155-SMI

TRAP-TYPE

Table 13 connUnitPortTable index and name values

connUnitPortIndex connUnitPortName

1 Host Port 1 (Controller A)

2 Host Port 2 (Controller B)

3 Host Port 1 (Controller A)

4 Host Port 2 (Controller B)