HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

Chapter 3 Managing Storage 103
b. To set read-write or read-only access on one or more ports, specify a LUN and
select the access privilege and ports. More than one host can use the same LUN
to access the same volume. If a port is not selected, its access is automatically set
to none.
c. Click Map It.
When processing is complete, the page shows the mapping changes.
5. To add or change an explicit mapping for the selected volume:
a. In the Add Or Modify A Mapping panel, select a host.
b. Click Map It.
When processing is complete, the page shows the mapping changes.
6. To explicitly mask the selected volume:
a. In the Add Or Modify A Mapping panel, select a host.
b. To set read-write or read-only access on one or more ports, specify a LUN and
select the access privilege and ports. More than one host can use the same LUN
to access the same volume. If a port is not selected, its access is automatically set
to none.
c. Click Map It.
When processing is complete, the page shows the mapping changes.
7. To remove an explicit mapping:
a. In the Remove A Mapping panel, select a host.
b. Click Unmap It.
When processing is complete, the mapping is removed from the page.