HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

Appendix A SNMP Configuration 237
connUnitPortStatLANTable Not supported N/A
SNMP TRAPS The following SNMP traps are
supported
trapMaxClients Maximum number of trap clients 1
trapClientCount Number of trap clients currently
enabled
1 if traps enabled; 0 if traps
not enabled
connUnitEventTrap This trap is generated each time
an event occurs that passes the
connUnitEventFilter and
the trapRegFilter
N/A
trapRegTable Includes the following objects per
the FA MIB2.2 Spec
trapRegIpAddress IP address of a client registered
for traps
IP address set through
Telnet
trapRegPort User Datagram Protocol (UDP)
port to send traps to for this host
162
trapRegFilter Settable: Defines the trap severity
filter for this trap host. The
connUnit will send traps to this
host that have a severity level less
than or equal to this value.
Default: warning[6]
trapRegRowState Specifies the state of the row • READ: rowActive[3] if
traps are enabled through
Telnet; otherwise
rowInactive[2]
• WRITE: Not supported
Table A-1 FA MIB 2.2 Objects, Descriptions, and Values (Continued)
Object Description Value