HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

Appendix E Event Codes 277
24 Informational The assigned LUN for this volume
has changed.
25 Informational The statistics for the specified vdisk
have been reset.
27 Informational Cache parameters have been changed
for the specified vdisk.
28 Informational Controller parameters have been
changed. This event is logged when
general configuration changes are
made; for example, utility priority,
remote notification settings, user
interface passwords, and management
port IP values. This event is not
logged when changes are made to
vdisk or volume configuration.
31 Informational A global or vdisk spare was deleted.
32 Informational Vdisk verification has started.
33 Informational Controller time/date has been
changed. This event is logged before
the change happens so the event
timestamp shows the "old" time.
34 Informational Controller has been restored to
factory defaults.
For an FC controller, restart it to
make the default loop ID take
effect.
37 Informational Vdisk reconstruction has started.
TABLE E-1 Event Descriptions and Recommended Actions (Continued)
Event
Code Event Type Description Recommended Action