HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

Appendix E Event Codes 289
176 Informational The error statistics for the specified
drive have been reset.
177 Informational The cache data for a missing volume
was purged.
178 Informational A host has been added to the list of
hosts that can access, or be denied
access to, a LUN. An Add Host
command was successful.
179 Informational A host has been removed from the list
of hosts that can access or be denied
access to a LUN.
180 Informational Hosts can either access, or be denied
access to, a LUN. This event
indicates when a host list type is
changed from include (to allow
access) to exclude (to deny access) or
from exclude to include.
181 Informational Advanced Network Interface
Structure was set. The Management
Controller configuration has been
changed.
182 Informational All busses have been paused. I/O will
not be performed on the drives until
all busses are unpaused.
183 Informational All busses have been unpaused,
meaning that I/O can resume. An
unpause initiates a rescan.
185 Informational An EMP write command has
completed.
186 Informational Enclosure parameters have been set.
187 Informational The write-back cache has been
enabled due to a battery state change.
188 Informational Write-back cache has been disabled
due to a battery state change.
TABLE E-1 Event Descriptions and Recommended Actions (Continued)
Event
Code Event Type Description Recommended Action