HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

298 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
298 Warning The controller’s real-time clock
(RTC) settings might be invalid after
an unexpected power loss.
Check the system date and time. If
either is incorrect, set them to the
correct date and time.
299 Informational The controller’s real-time clock
(RTC) settings were recovered after
an unexpected power loss.
300 Informational CPU frequency has been adjusted to
high.
301 Informational CPU frequency has been adjusted to
low.
302 Informational DDR memory clock has been
adjusted to high.
303 Informational DDR memory clock has been
adjusted to low.
304 Informational The controller has detected I
2
C errors
that may have been fully recovered.
This event is logged as informational
to note an existence of previous I
2
C
errors.
305 Informational A serial number in Storage Controller
flash memory is invalid. The valid
serial number will be recovered
automatically.
306 Informational An old serial number in Storage
Controller flash memory has been
updated to a new serial number.
TABLE E-1 Event Descriptions and Recommended Actions (Continued)
Event
Code Event Type Description Recommended Action