HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

Chapter 2 Configuring Your System for the First Time 33
Note – For security reasons, create different usernames unique to your site. If you
keep the default ones, change their default passwords.
4. Change the user’s password.
The password is case sensitive and can include 19 characters. Allowed characters
include letters, numbers, hyphens, underscores, and spaces.
5. Change the user’s access level:
■ Monitor enables access to all functions on the Monitor menu.
■ Manage enables access to all functions on the Monitor and Manage menus.
Note – In a list the current setting is marked with two asterisks (**).
6. Change the user type:
■ Standard enables access to most functions.
■ Advanced additionally enables access to infrequently used administrative
functions.
■ Diagnostic additionally enables access to troubleshooting functions for use by
service technicians.
7. Enable or disable user access to system interfaces:
■ WBI – The web-browser interface (SMU)
■ CLI – The command-line interface
■ FTP – The file transfer protocol interface
Note – A system interface can be used only if the corresponding network
management service is enabled on the Manage > General Config > Services
Security page.
8. Click Save Changes.
The System User List is updated.