HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)
Chapter 2 Configuring Your System for the First Time 35
Deleting Users
You can delete any user from the system, including the default users.
Note – The deletion of a system user cannot be undone.
To delete a user:
1. Select Manage > General Config > User Configuration > Delete Users.
The System User List panel displays the current list of configured users.
2. Select a user from the Username drop-down list and click Delete User.
A confirmation prompt is displayed.
3. Click OK to confirm the operation or Cancel to stop it.
If you clicked OK, a message indicates whether the operation succeeded. If it
succeeded, the user is removed from the System User List panel.
Managing Licenses
You can purchase a license to expand baseline functionality. Depending on the
license options you purchase, you can:
■ Increase the number of snapshots that can be taken
■ Enable the ability to copy volumes
You must obtain and install the license certificate file that enables the purchased
options. The following are requirements for successful license installation:
■ The file must be installed on the controller enclosure with the serial number and
firmware version for which the file was generated.
■ The file is a text file with a .txt extension.
■ The file has not been edited in any way.