HP StorageWorks 2000 Modular Smart Array Reference Guide (481599-003, August 2008)

46 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
On the Manage CHAP page you can create, view, modify, and delete entries. Panels
on this page have these icons:
■ Expand panel icon – Click to show the panel’s content.
■ Collapse panel icon – Click to hide the panel’s content.
■ Cancel icon – Click to cancel creating an entry.
Creating a CHAP Entry
To create a CHAP entry:
1. Select Manage > General Config > Manage CHAP.
2. In the CHAP Entries panel click Add New Entry.
The Create CHAP Entry panel is displayed.
3. Specify authentication data:
■ Node Name – Select an originator name from the list. The list contains host node
names from the global host list that do not already have CHAP entries.
■ Secret – The secret that the recipient uses to authenticate the originator. The
secret is case sensitive and can include 12–16 characters.
■ Name, if Mutual CHAP – Optional; for mutual CHAP only. Specifies the
recipient name, which is typically the recipient's IQN. The name is case sensitive
and can include a maximum of 223 characters.
The storage system’s IQN is shown on the Host Port Status page; see “Host Port
Status” on page 152.
■ Secret, if Mutual CHAP – Optional; for mutual CHAP only. Specifies the secret
that the originator uses to authenticate the recipient. The secret is case sensitive
and can include 12–16 characters. A storage system's secret is shared by both
controllers.
4. Click Create Entry.
The new entry is displayed in the CHAP Entries panel.