HP StorageWorks 2012sa Modular Smart Array user (488320-004, March 2013)
Table Of Contents
- Contents
- About This Guide
- 1
- System Components
- 2
- Installing and Cabling Enclosures
- 3
- Connecting Hosts
- 4
- Configuring a System for the First Time
- 5
- Troubleshooting
- Fault Isolation Methodology
- Correcting Enclosure IDs
- Using System LEDs to Diagnose Problems
- Is the front panel Fault ID amber?
- Is the controller back panel OK LED off?
- Is the controller back panel Fault/Service Required LED amber?
- Are both drive module LEDs, Online/Activity, and Fault/UID LEDs off?
- Is the drive module Fault/UID LED blinking amber?
- Is a connected port’s Host Link Status LED off?
- Is a connected port’s Expansion Port status LED off?
- Is a connected port’s Ethernet link status LED off?
- Is the power-and-cooling module AC Power Good LED off?
- Is the power-and-cooling module DC Voltage/Fan Fault/Service Required LED amber?
- Is the drive enclosure back panel OK LED off?
- Is the drive enclosure Fault/Service Required LED amber?
- Isolating a Host-Side Connection Fault
- Isolating a Controller Module Expansion Port Connection Fault
- Resolving Voltage and Temperature Warnings
- A
- Environmental Requirements and Specifications
- B
- Regulatory Compliance and Safety
- Index
100 HP 2012sa Modular Smart Array user guide • January 2013
connecting AC,36
power cord
compliance notice,85
current rating,85
replacement,85
set,85
voltage rating,85
power cord requirements,76
power-and-cooling modules
LEDs,16
AC Power Good, 17, 22
DC Voltage/Fan Fault/Service Required,17, 22
power switches,21
voltage sensor descriptions,69
preventing electrostatic damage,85
R
racks
preparing,28
recycling, battery,84
recycling, Taiwan EPA battery,84
regulatory compliance
information number,79
notices
BSMI,82
Canada,81
Class A,77
Class B,78
European Union,82
HP series number,79
IEC EMC statement, worldwide,81
Japan,83
Korean,83
lasers,80
modifications,79
shielded cables, 74, 79
remote management,40
replacing a power cord,85
requirements
host system,39
RFI/EMI connector hoods,74, 79
S
safety precautions,26, 71
sensors
cooling fan,67
locating,66
power supply,67
temperature,68
voltage,69
series number, regulatory compliance,79
SES driver, installing on data hosts,40
shock operating range,75
site planning
electrical requirements,76
EMC,71
enclosure weight and dimensions,74
environmental requirements,75
local management host requirement,74
physical requirements,74
safety precautions,71
SMU
about,12
configuring,46
creating virtual disks,48
logging in,46
logging out,51
setting date and time,47
testing system configuration,50
static-dissipating work mat,86
static-safe containers
storing products,85
transporting products,85
status LEDs,14
Storage Management Utility, See SMU
storage system
configuring for the first time,41
environmental requirements,75
powering on,37
testing configuration,50
storage website,10
straps, ground
boot,86
heel,86
toe,86
Subscriber’s choice website,10
Subscriber’s choice, HP,10
T
Taiwan EPA battery recycling and disposal,84
telephone numbers
FCC questions,78
temperature operating range,75