HP StorageWorks 2012sa Modular Smart Array user (488320-004, March 2013)
Table Of Contents
- Contents
- About This Guide
- 1
- System Components
- 2
- Installing and Cabling Enclosures
- 3
- Connecting Hosts
- 4
- Configuring a System for the First Time
- 5
- Troubleshooting
- Fault Isolation Methodology
- Correcting Enclosure IDs
- Using System LEDs to Diagnose Problems
- Is the front panel Fault ID amber?
- Is the controller back panel OK LED off?
- Is the controller back panel Fault/Service Required LED amber?
- Are both drive module LEDs, Online/Activity, and Fault/UID LEDs off?
- Is the drive module Fault/UID LED blinking amber?
- Is a connected port’s Host Link Status LED off?
- Is a connected port’s Expansion Port status LED off?
- Is a connected port’s Ethernet link status LED off?
- Is the power-and-cooling module AC Power Good LED off?
- Is the power-and-cooling module DC Voltage/Fan Fault/Service Required LED amber?
- Is the drive enclosure back panel OK LED off?
- Is the drive enclosure Fault/Service Required LED amber?
- Isolating a Host-Side Connection Fault
- Isolating a Controller Module Expansion Port Connection Fault
- Resolving Voltage and Temperature Warnings
- A
- Environmental Requirements and Specifications
- B
- Regulatory Compliance and Safety
- Index
Index 99
H
heartbeat
LED,14
heel straps, using,86
help, obtaining,10
hosts, See data hosts
HP
address for
FCC questions,78
series number,79
telephone number
FCC questions,78
humidity operating range,75
HyperTerminal settings, See terminal emulator
I
IDs, correcting for enclosure,55
IEC EMC, worldwide regulatory compliance notice,81
indicators, See LEDs
installing enclosures
checklist,27
safety precautions,26
installing required host software and drivers
SES driver,40
IP addresses
setting using DHCP,38
setting using the CLI,42
J
Japan
regulatory compliance notice,83
K
Korean, regulatory compliance notice,83
L
label, laser,81
laser
international certification and classification
information,81
product label,81
radiation, warning,80
regulatory compliance notice,80
LEDs
AC Power Good, 17, 22
amber fault conditions,56
cache status,18, 19
DC Voltage/Fan Fault/Service Required,17, 22
drive modules,15
Enclosure ID,14
Ethernet activity,20
Ethernet link status,19
expansion port status,20
Fault/Service Required, 18, 23
heartbeat,14
host activity,19
host link status,17
OK, 18, 23
OK to Remove, 18, 22
SAS In port status,22
SAS Out port status,23
status,14
Unit identification (UID),14
Unit Locator,18, 22
using to diagnose fault conditions,56
lithium battery,84
local management host requirement,74
M
managing storage systems
using SMU,12
using the CLI,12
mapping, data hosts to volumes,50
MPIO DSM, obtaining,39
O
operating ranges, environmental,75
P
parts
proper handling,86
storing,85
transporting,85
physical requirements,74
ports
CLI,16
Ethernet,16
expansion,16
host,16
SAS In,21
SAS Out,21
service, 16, 21
power