HP StorageWorks Modular Smart Array 1510i 2-Port Ethernet iSCSI module replacement instructions (February 2006)

Page 1
*383079-002*
383079–002
About this document
This document details procedures for replacing a failed 2-Port
Ethernet iSCSI module in an HP StorageWorks Modular Smart Array
1510i (MSA1510i.)
Before you begin
Read the following cautions and notes.
CAUTION: Be sure the replacement is available before
removing the failed component. Removing a component impacts
airflow and cooling within the enclosure.
CAUTION: Follow these instructions when replacing
components. If the procedure is done improperly, it is possible to
lose data or damage equipment.
CAUTION: Parts can be damaged by electrostatic discharge.
Use proper anti-static protection. See documentation shipped with
your system for additional information.
CAUTION: Stop all system access to the module before
proceeding with these replacement procedures.
NOTE: For optimum performance from the MSA1510i, use
qualified Category 5e (or better) Ethernet cables when connecting
the Ethernet iSCSI module to the switch.
Verifying module failure
• Verify that the Ethernet iSCSI module Status LED is not
illuminated, or is blinking amber.
These patterns indicate a faulty module.
15179A
© Copyright 2005-2006 Hewlett-Packard Development Company,
L.P.
Second edition February 2006
Product names mentioned herein may be trademarks of their
respective companies as reflected by an associated footnote.
Information in this document is subject to change without notice.
Printed in the US.
www.hp.com
HP StorageWorks
Modular Smart Array 1510i
2-Port Ethernet iSCSI module
replacement instructions