HP Smart Array Controllers on HP ProLiant Servers User Guide

Specifications 31
To access SAAP features, activate the software with a registered license key.
SAAP 1.0 provides the following features:
• RAID 6 (ADG)
• RAID 60
• Advanced Capacity Expansion
• Mirror splitting and recombining in offline mode
• Drive Erase
• Performance optimization for video on demand
• Dual domain
SAAP 2.0 includes all v1.0 features and also provides the following additional features:
• RAID 1 (ADM) and RAID 10 (ADM)
• Capability for moving and deleting individual LUNs
• Split mirror backup and rollback of RAID 1, 1+0, 1 (ADM) and 10 (ADM) mirrors
• Heal Array
To access SAAP features, you must purchase a license key from HP. To obtain a license key, see the SAAP
product page on the HP website (http://www.hp.com/go/SAAP).
To install the license key and activate SAAP, use a supported array configuration tool:
• Option ROM Configuration for Arrays (ORCA)
• HP Array Configuration Utility (ACU)
For registration procedures, see the Configuring Arrays for HP Smart Array Controllers Reference Guide
available on the controller Documentation CD or the ACU product page on the HP website
(http://h18004.www1.hp.com/products/servers/proliantstorage/software-management/acumatrix/inde
x.html).
Required hardware
For a list of Smart Array controllers that support SAAP, see the SAAP product page on the HP website
(http://www.hp.com/go/SAAP).
To support some controller features, the controller may also require a hardware configuration that includes
the following cache (array accelerator) options:
• A cache module that is 256 MiB or larger
• A compatible battery pack or capacitor pack
To obtain these options, contact an HP authorized reseller or see the HP website
(http://www.hp.com/products/smartarray).
Supported servers and server blades
Use the following table to identify server and server blade support for HP Smart Array controllers.