HP Smart Update Manager User Guide Abstract This guide is intended for individuals familiar with the configuration and operation of Microsoft Windows, Windows Server, Linux, smart components, and deployment of firmware and software. Because of the risk of data loss, only individuals experienced with using firmware and software should implement the procedures.
© Copyright 2009, 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Confidential computer software.
Contents 1 Introduction...............................................................................................6 HP SUM overview.....................................................................................................................6 Deploying HP SUM...................................................................................................................7 Running HP SUM...............................................................................................................
3 Using scripts to deploy updates..................................................................31 Command-line interface...........................................................................................................31 Command-line syntax.........................................................................................................31 Switch update commands...............................................................................................31 Command-line arguments.........
HP SUM prevents an upgrade of Virtual Connect firmware if the VC health is invalid or bad health state......................................................................................................................................67 Downgrade of ProLiant G6 Server ROM from 2010.03.30 or later to 2010.03.01 or earlier using HP SUM is not supported.........................................................................................................
1 Introduction HP SUM overview HP SUM is a technology included in many HP products for installing and updating firmware and software components on HP ProLiant and HP Integrity servers, enclosures, and options. HP SUM provides a GUI and a command-line scriptable interface for: • Deployment of firmware for single or one-to-many ProLiant and Integrity servers and network-based targets such as iLOs, OAs, and VC Ethernet and Fibre Channel modules.
Deploying HP SUM The following sections discuss deployment from HP SUM. For more information on planning an update, see the HP ProLiant Firmware Management Best Practices Overview, HP ProLiant Firmware Management Best Practices Planning Guide, or HP BladeSystem ProLiant Firmware Management Best Practices Implementer Guide, available on the HP SUM documentation website at http:// www.hp.com/go/hpsum/documentation. NOTE: HP SUM stores host and group information from session to session.
Scenario Description Interactive, graphical deployment on a local host Use this scenario when you: • • Are not familiar with command line tools • • Are deploying components on a local, single host Run HP SUM on the server being updated. HP SUM command Windows: hpsum .
Scenario Description • Need to update all enclosure firmware • Need to target VMware host servers HP SUM command Target2 -username User1 -password PW1 HP deliverable ◦ HP Integrity BL8x0c i2, rx2800 i2, and Superdome 2 Servers Bundles for Windows and Linux ◦ HP Service Pack for ProLiant • Offline: SmartStart Scripting Toolkit (G7 and older) Scripting Toolkit (Gen8 and older) Automatic Deployment to Use this scenario when you: The HP SPP and Smart one or more servers in a HP • Do not have an operatin
HP SUM supported firmware for ProLiant servers Component Supported System ROM Yes iLO 2 firmware Yes, both server-based and directly to the iLO Management NIC port Broadcom NIC firmware Yes Intel NIC firmware Yes NetXen NIC firmware, QLogic NIC firmware Yes, online PowerPIC firmware Yes, beginning with bundle 1.
For more information about deploying firmware on ProLiant servers, see the HP Service Pack for ProLiant User Guide on the HP SPP website at http://www.hp.com/go/spp. Deploying Integrity firmware bundles with HP SUM You can use HP SUM to deploy components delivered with the Integrity Server Bundles, or use HP SUM to pull updates from the web.
Term Definition firmware. You might need to reboot the target to activate the firmware. Offline In offline mode, the HP SUM boots a small Linux kernel and enables updates to occur on a single server.
temporarily disable BitLocker and does not cancel the flash, the BitLocker recovery key is needed to access the user data upon reboot. A recovery event is triggered if: • You do not temporarily disable BitLocker before flashing the system BIOS when using the Microsoft BitLocker Drive Encryption. • You have optionally selected to measure HP iLO, Smart Array, and NIC firmware. If HP SUM detects a TPM, a warning message appears.
The following table describes TPM detection scenarios that you might encounter. Scenario Result If TPM is detected and enabled, the installation is not silent, A warning message appears. Select OK to continue. The and a system ROM must be updated. installation is not canceled. If TPM is detected and enabled, the installation is silent, the /tpmbypass switch is not given, and any firmware updated must be applied to the server. No warning appears.
2 Using the HP SUM GUI Keyboard support The HP SUM GUI has accelerator keys that enable you to manage and control common tasks quickly. To ensure proper navigation, the following are a few reminders. • Press ALT to see the task corresponding to the underlined letter. • The accelerator keys work by pressing ALT + the underlined letter. • Press Space to select items such as hosts or groups. • Press Tab to select from a list, and then press the arrow keys to toggle radio buttons.
Current Repositories table The Current Repositories table displays: • Name—This field displays the repository name. Select the repositories you want to use by clicking the checkbox next to the repository name. If you want to edit a repository, highlight the entire line to activate the Edit and Remove buttons. ◦ HP SUM automatically creates a repository named Default and scans it for updates. This repository is the folder that holds the HP SUM application. ◦ The HP FTP site (ftp://ftp.hp.
3. 4. 5. Select Server or Script. • If you chose Server, enter the server IP Address and Port information. • If you chose Script, enter the script location in one of the following ways: ◦ Click Detect Proxy to automatically add the default location of the configuration script. ◦ Manually enter the address. Enter the User ID and Password (if necessary). Click OK. Using multiple repositories HP SUM allows you to select one or more repositories when selecting components to be installed.
1. Click Add Repository, and then choose Firmware Only, Software Only, or Both. You can choose the updates to use when you add or edit a repository. By default, HP SUM displays firmware and software updates. If you want to view which updates are being used in an existing repository, select the repository in the Current Repositories table, and then click Edit Repository. • Both - HP SUM displays component firmware and software updates that are ready.
software installed by the component. The configuration is stored within the component and is propagated to all targets. If the optional configuration data of a component is not provided and the component has not been installed previously, then default values for that configuration data are used. If the component has been previously installed and configured and no changes are made to the configuration data, then the existing configuration information is preserved.
Selecting the targets The Select Targets screen automatically detects the local system running HP SUM and adds it to the targets list. To find new targets, click Find Targets or Add Single Target. For more information, see “Finding and discovering targets” (page 22) or “Adding a single target” (page 22). If you have an enclosure that has different target types that share credentials and need to be updated at the same time, create a group to manage them.
• Description—This field displays the description of the target. • Type—This field displays the type of target (for example, iLO or Onboard Administrator). NOTE: For HP SUM to discover a Broadcom NIC during an online update, you must bring the NIC up in Linux. From a command line, enter # ifup ethx or # ifconfig ethx up. Inter-target dependency HP SUM finds potential targets by checking the OA host server list for all targets you add.
Finding and discovering targets 1. 2. Click Find Targets. Select IP Address Range, Port Address, or LDAP Scan for Remote Targets, and then click OK. • IP Address–Enables you to search a range of IP addresses in IPv4 or IPv6 format. Enter the required address range information, click Search, select the target, and then click Add to List. NOTE: HP SUM searches only c-class IP addresses, and a maximum of 255 targets. For example, you can search for IP address 192.168.1.1 through 192.168.1.
3. 4. Enter the root or administrator user name and password. Click OK after entering the information to exit this page. Removing a target Select a target, highlighting the entire line, and then click Remove Target. If you remove a target, HP SUM removes the target from any groups and any scheduled updates. Managing groups To add a new group: 1. Enter a Group Name. 2. Enter a Description (optional). 3. From the Available Targets list, select the targets to add to the group. 4. Click Add. 5.
Reviewing and installing updates This screen appears after HP SUM completes the dependency checks for each target. The status column notifies you whether each target has updates available, is ready to update, or if there are dependencies you need to resolve. On the Select Bundles or Select Components screen, you can select the devices on each target that you want to update. Click Select Bundles to use a collection of components that have been tested together for the target.
HP SUM adds an expansion box next to the most recent version of the component. To install an older version of the component, expand the list, and then select the older component version. NOTE: If you select individual components from the Select Unbundled Components list on the Select Bundles screen, these selections are also applied to the Select Components screen. • Last Updated—This field displays the last time this target was updated by HP SUM from the current host running HP SUM.
• Available Version—Displays the newest version available, if it is not active. Some updates require rebooting the target. If the target has not been rebooted, then the new version is installed, but not yet active. • Optional—Displays links to actions you can perform to for the target. ◦ Select Devices—Selects devices associated with this target. You can select the bundles that you want to apply, and view any errors or warnings that might be associated with the bundle or component.
4. Check each component that you want to update on the selected target. If there is a dependency failure, click Failed Dependency to see potential solutions for the component. NOTE: HP Integrity servers only: If you see an error that reads, "Mismatch Found" or "Mismatch Found Update Required", click the message to view the Select Devices screen. For more information on this error, see “Viewing firmware mismatch details (HP Integrity servers only)” (page 28). 5. Click OK.
Table 1 View Firmware Details screen HP ProLiant servers HP Integrity servers SPP version Bundle version NIC version iLO version Fiberware version Power Monitor firmware version Component versions System firmware version Bundle version FPGA firmware version • Bundle version NOTE: The bundle version is only displayed if all four firmware versions match a known bundle. If there is no known bundle, then HP SUM will display Unknown.
Reboot options If you set the reboot options on the Review/Install Updates screen, they are set for all the targets. If you want to set the reboot options for only specific targets, click Select Bundles or Select Components for the target, and then click Reboot Options for the target. NOTE: For Superdome 2 servers, the reboot options are set for each partition on the Select Devices screen. HP SUM does not support global reboot options for Superdome 2 servers. To set the reboot options: 1.
3. Choose the topic you want to view in the report. Topics that are not valid are grayed out. The Report name will be displayed next to the report selected once it is checked. • Inventory Selections–Provides details of the contents in all selected repositories. • Target Firmware–Provides firmware versions for the selected targets. You can generate this report after you have entered the target credentials and HP SUM completes the discovery process on the Select Targets screen.
3 Using scripts to deploy updates Command-line interface You can use the HP SUM command-line interface to script custom installations.
The following table shows what updates occur if no switches are currently installed. Command G7 and earlier servers Gen8 servers no switches SNMP AMS /use_ams N/A AMS /use_snmp SNMP SNMP /use_wmi WBEM WBEM /use_ams/use_snmp SNMP AMS and SNMP /use_ams/use_wmi WBEM AMS and WBEM /use_wmi/use_snmp WBEM and SNMP WBEM and SNMP /use_ams/use_wmi/use_snmp WBEM and SNMP AMS, SNMP and WBEM The following table shows what updates occur if SNMP switches are currently installed.
Command G7 and earlier servers Gen8 servers /use_snmp N/A AMS and SNMP /use_wmi N/A AMS and WBEM /use_ams/use_snmp N/A AMS and SNMP /use_ams/use_wmi N/A AMS and WBEM /use_wmi/use_snmp N/A AMS, SNMP, and WBEM /use_ams/use_wmi/use_snmp N/A AMS, SNMP, and WBEM NOTE: G7 and earlier servers do not support AMS. Command-line arguments HP SUM recognizes the following command-line arguments, which you can use to pre-populate the GUI on the Source Selection and Review/Install Updates screens.
Installation options Description /c[omponent] or Specifies which components to install. Components to install can be specified with or without the /c[omponent] argument. • If you are using the /c[omponent] argument, then only one component can specified with the argument. However, multiple /c arguments and components can be specified on the same line.
Installation options Description The /user and /passwd arguments do not have any effect when you are attempting to access the file share. Use those arguments only when you are connecting to a target system. /use_web Specifies that the check box for Check ftp.hp.com on the Source Selection screen is selected. This enables components to be retrieved from ftp.hp.com and used in the list of possible updates. /use_proxy Enables the inclusion of a proxy server (and port number) to access ftp.
Installation options Description default repository and may downgrade drivers and firmware to the versions in the default directory as part of the installation operation. The express installation feature allows you to set a baseline and enforce it regardless of the currently installed version of drivers and firmware on the local server.
Reboot options Description use this argument with the /reboot option, or the argument is ignored. /reboot_delay timeout_in_secs Delays the reboot of the server for the length of time that the timeout_in_seconds variable specifies. You must use this argument with the /reboot option, or the argument is ignored. Acceptable values are between 15 and 3600. • The default timeout value is 15 seconds for Microsoft Windows operating systems and 60 seconds for Linux.
Targets Description To update multiple VCs with different user names and passwords, or VCs with OAs that have different credentials, use the corresponding input files OAUID and OAPWD. /_password Provides the password credential for OA associated with VC specified with the "target" command-line parameter. Only one set of OA credentials can be specified with command-line parameters.
Generating reports Description write-protected, you can find the report in the same directory as the HP SUM log files. /firmware_report Generates a report listing of the firmware installed and details of the target. The report is generated in HTML and XML with file names of HPSUM_Firmware_Report.html and fwreport.xml in the directory named HPSUM_Firmware_Report__
Command-line examples The following command-line parameter examples can be executed within these environments: • • • Firmware: ◦ System ROM ◦ Smart Array controller ◦ Hard drives ◦ iLO Software—later version of: ◦ HP Insight Diagnostics Online Edition for Windows Server 2003 (cp008097.exe) ◦ HP System Management Homepage (HP SMH) for Windows (cp008257.
/override_existing_connection /continue_on_error ServerNotFound /silent /logdir "Management_Server_Files" • hpsum /target "Management Server1" /target "Management Server2" /target "Management Server3" /user administrator /passwd letmein /use_latest /allow_update_to_bundle /allow_non_bundle_components /force:all /override_existing_connection /continue_on_error ServerNotFound /silent /logdir "Management_Server_Files" Results: All software components and firmware components from the update bundle, cp008097.
Linux smart-component return codes Single-target servers: Error level Meaning 0 The smart component was installed successfully. 1 The smart component was installed successfully, but the system must be restarted. 2 The installation was not attempted because the required hardware is not present, the software is current, or there is nothing to install. 3 The smart component was not installed. For more information, see the log file.
Input files HP SUM provides the ability to script the update of multiple, individual targets or groups of targets (HP ProLiant and Integrity servers and options) within a single operation through the input file functionality. To protect your credentials, use a secure server or a management console. To create an input file, use a text editor. All section headers and trailers must match.
the variable USECURRENTCREDENTIAL to YES. You can supply login credentials for one or more hosts by using the variables UID and PWD. If you want to provide the variables at the beginning of a TARGETS section, use both of them. If you want to provide the variables in the middle of a TARGETS section, use one or the other to override the selected variable and continue using the active value for the remaining variable. ◦ Remote target: You can specify a remote target by using the variable HOST.
Parameter Description Possible values COMPONENTSLIST Limit the list of components to be updated. Component names with file extensions (.exe, .rpm, or .scexe) BUNDLESLIST Limit the list of bundle xml files to be filtered. Bundle file names ALLOWUPDATEBUNDLE This is a filter switch and enables you to install newer versions of components defined in a PSP, ISP, or bundle.
Parameter Description Possible values USESNMP Specifies that components that use SNMP YES, NO protocol, are available to be selected for installation. These components are available for selection by default. When the /usesnmp parameter is used, and the /usewmi parameter is not used, the WMI components are optional. This parameter does not apply to HP Integrity servers. USEWMI Specifies that components that use WMI protocol are available to be selected for installation.
Parameter Description Possible values OmitComponent clears the affected components and proceeds with any updates that do not have dependency failures. Force attempts all updates, even if they have dependency failures. HOST This parameter is the IP address or the IP address, DNS name DNS name of a remote server, remote iLO NIC port, Virtual Connect Ethernet or Fibre Channel Module for c-Class BladeSystem, or BladeSystem OA. When two OAs are in an enclosure, this parameter is the active OA.
Parameter Description Possible values multiple locations separated by a space. (Applies to Linux PSP only.) CMAMGMTSTATIONROCOMMSTR Specifies an SNMP read/write community SNMP read/write community string string for a system with read-only access that serves as a management station. You can specify multiple strings separated by a space. (Applies to Linux PSP only.) CMADEFTRAPCOMMSTR Sets a default SNMP community string for SNMP community string traps. (Applies to Linux PSP only.
Parameter Description Possible values ADMIN-GROUP HP Systems Management Homepage (hpsmh) uses this parameter to set up security for the web server. (Applies to Linux PSP only.) Up to five Linux groups, separated by spaces or semicolons, to enable administrative access to the web services. USER-GROUP HP Systems Management Homepage uses Up to five Linux groups, separated by this parameter to set up security for the spaces or semicolons, to enable user-level web server. (Applies to Linux PSP only.
Parameter Description access granted to local users. (Applies to Linux PSP only.) TRUSTMODE Possible values provides full access to any user who has access to the local console, without prompting for a user name or password. HP Systems Management Homepage uses • TrustByCert—If you use this value, you this parameter to set up the trust must define the CERTLIST parameter relationship mode. (Applies to Linux PSP to enable access to the server. only.
Parameter Description Possible values IGNOREWARNINGS Allows the installation to proceed on a YES, NO Superdome 2 target even when warnings Superdome 2 servers only are returned during analysis. UPDATETYPE This argument determines which Superdome 2 firmware is updated. ALL, COMPLEX, PARTITIONS Superdome 2 servers only DEVICELIST Use this argument when the For example: DEVICELIST = npar1, UPDATETYPE=PARTITIONS.
SILENT = YES [TARGETS] HOST = BL465C-01 HOST = 192.168.1.2 [END] Example A host DNS is passed along with the user ID and password to use for the hosts in the group. DRYRUN = YES SILENT = YES [TARGETS] HOST = BL685cG6 UID = Bigboss2 PWD = password [END] Example SILENT = YES IGNOREERRORS = ServerNotFound,BadPassword, FailedDepedencies SKIPTARGET = NO SOURCEPATH = C:\fwcd\firmware-8.
[END] [TARGETS] HOST=16.83.62.196 UID=Userid PWD=password [END] [TARGETS] HOST=16.83.61.24 UID=Userid PWD=password [END] Example: Superdome 2 input files: IGNOREWARNINGS = TRUE [TARGET] HOST = 10.0.0.206 UID = Userid PWD = password UPDATETYPE = PARTITIONS DEVICELIST = npar1, npar2, blade1/4, blade 1/5 REBOOTLIST = npar1, npar2 [END] Reports HP SUM generates three types of reports about the specified system or repository. HP SUM generates these reports by using the command-line arguments.
Report type Description Report file information* /dependency_report This argument generates a report The following report file is generated: that lists failed dependencies for HPSUM_FailedDependency_Reports_.xml all targets. or .html /installed_report This argument generates a report The following report file is generated: that lists all installed firmware, HPSUM_Installed_Report_.xml or software, and driver versions .html installed on targets.
4 Advanced topics Configuring IPv6 networks You can deploy to remote targets in IPv6-based networks for Windows and Linux target servers. Using HP SUM with IPv6 networks presents challenges for IT administrators. For Windows-based servers, to communicate with remote target servers, HP SUM uses either existing credentials or the user-provided user name and password to connect to the admin$ share. This share is an automatic share provided by Windows Server.
IPv6 addresses can be passed to HP SUM in command line arguments or using the HP SUM user interface. In the HP SUM user interface, you can add a remote host on an IPv6 network by either entering the DNS name of the IPv6 target server or by selecting the IPv6 address button and entering the IPv6 address. HP SUM supports both the short-name and full IPv6 notation. You do not need to add the optional interface number when you enter the address.
The only current limitation of HP SUM in a Linux IPv6 environment is that all remote target Linux-based servers must have the iptables-ipv6 RPM file installed. You can find the file on the distribution media for both Red Hat Enterprise Linux and Novell SUSE Linux Enterprise Server operating systems. HP SUM uses this file to open a port in the IPv6 firewall to communicate with the Linux system that runs HP SUM.
Table 3 HP SUM Linux network ports Ports Description Port 22 Establishes a connection to the remote Linux server via SSH. For Integrity servers, HP SUM uses this port to discover target settings. 443 A secure data port used to transfer information. Port 62286 Default for some internal communications. It listens on the remote side if there is no conflict. If a conflict occurs, the next available port is used.
5 Troubleshooting Recovering from an installation failure Collecting trace directories HP SUM generates a set of debug trace logs located in the %TEMP%\hp_sum directory on Windows systems. These files contain internal process and debug information, which can be useful in determining HP SUM failures. The debug trace files can be located under %temp%\hp_sum for windows. The log files can be located under C:\cpqsystem\hp\log.
Log Files Function \hpsum_log.txt Contains information of HP SUM discovery, installation status and errors if any. Note: is the name of the target in the source selections screen. Hpsum_detail_log.txt Contains the log data of the components. hpsum_execution_log__
verified by entering net use at a command prompt. If a share to the target IP address \admin$ share exists, delete it, and then attempt the installation again. • Ensure that the target IP address server’s admin$ share is accessible. Validate the target server can be accessed by entering net use x: \\\admin$ for the target server IP address or DNS name. When the connection is validated, ensure that it is deleted by entering net use x: /d at the command prompt.
Recovering from a blocked program on Microsoft Windows Configuring Windows firewall settings The Windows Security Alert popup appears when a program is blocked from accepting connections from the Internet or a network. To set the rules for the Windows Firewall and Security Policy, click Unblock, and then set your firewall settings to the following: 1. Click Start→Control Panel→Administrative Tools→Windows Firewall with Advanced Security→Inbound Rules→Remote Administration (NP-IN). 2.
Do not run HP SUM in directories containing multi-byte characters in the path name. Recovering a lost HP SUM connection HP Smart Update Firmware DVD and SPP mounted using iLO virtual media When either iLO or NIC firmware are updated, the HP SUM connection might be lost. If this happens, it prevents the installation of components from continuing. You cannot boot into Offline Interactive mode while using the iLO Virtual Media.
You can always copy HP SUM to the target servers and execute using the local installation method. Troubleshooting HP SUM in IPv6 Windows Server 2008 environment To validate that the IPv6 network is configured correctly for HP SUM support, you must verify the following based on your operating system version. • Validate that you can ping the remote target server.
Microsoft Windows displays a Found new hardware message During the discovery progress, HP SUM might display the following message: Found New Hardware. This message appears because one of the self-discovery components is loading a new driver and the Windows operating systems discovers it as a new piece of hardware.
returned. HP SUM cannot determine which source RPMs go with which distribution because the RPMs do not contain any operating system information. To resolve this issue, ensure that you select the bundle for the operating system distribution on the Select Bundle screen for installation or remove the RPMs from the directory that are not applicable to the Linux distribution you are using.
10. Click OK to ensure new firewall rules have been implemented. 11. Restart HP SUM. Performing these steps allows HP SUM to function, although after a period of time (ranging from minutes to hours), McAfee disables HP SUM access. HP SUM prevents an upgrade of Virtual Connect firmware if the VC health is invalid or bad health state. Virtual Connect firmware can be upgraded using HP SUM only if the health state of the VC is in a good state.
To resolve the following issues, use VCSU to upgrade the firmware. • Unhealthy • Non-redundant • Not part of a domain • The user wants to select the order of deployment • The user wants to back-up the configuration before flashing the VC firmware Downgrade of ProLiant G6 Server ROM from 2010.03.30 or later to 2010.03.
6 Support and other resources Information to collect before contacting HP Be sure to have the following information available before you contact HP: • Active Health System log (HP ProLiant Gen8 servers only) Download and have available an Active Health System log for 3 days before the failure was detected. For more information, see the HP iLO 4 User Guide or HP Intelligent Provisioning User Guide on the HP website: http://www.hp.
Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, send a message to docsfeedback@hp.com. Include the document title and manufacturing part number. All submissions become the property of HP.
http://www.hp.com/go/msa Typographic conventions Table 4 Document conventions Convention Element Blue text: Table 4 (page 71) Cross-reference links and e-mail addresses Blue, underlined text: http://www.hp.
comprehensive remote monitoring and proactive service support for nearly all HP servers, storage, network, and SAN environments, plus selected non-HP servers that have a support obligation with HP. It is integrated with HP Systems Insight Manager. A dedicated server is recommended to host both HP Systems Insight Manager and HP Insight Remote Support Advanced. Details for both versions are available at: http://www.hp.
7 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (docsfeedback@hp.com). Include the document title and part number, version number, or the URL when submitting your feedback.
Acronyms and abbreviations AMS Agentless Management Service CPLD complex programmable logic device DNS domain name system FPGA Field Programmable Gate Array HP SUM HP Smart Update Manager iLO Integrated Lights-Out IPDU intelligent power distribution unit ISP Integrity Support Pack MP Monarch (primary) OA Onboard Administrator POST Power-On Self Test PSP HP ProLiant Support Pack RBSU HP ROM-Based Setup Utility RILOE II Remote Insight Lights-Out Edition II SEP Symantec Endpoint Pr
Index A E advanced topics, 55 arguments, 33 blocked HP SUM, recovering from, 62 bundle filter options Add Repository, 17 Edit Repository, 18 Select bundles, 25 editing hosts, 18 errors Installation of components failed with 'Update returned an error' when installing Linux RPMs, 65 Non-matching systems error reported when building source Linux RPMs or installing Linux RPMs built from source, 65 Recovering from a discovery failure, 60 execution, first time, 7 C F CLI (Command Line Interface) Command-li
Recovering from an installation failure, 59 installation options, 27 introduction, 6 IPv6 network configurations Configuring IPv6 for Windows Server 2008, 56 Configuring IPv6 networks with HP SUM, 55 IPv6, troubleshooting Troubleshooting HP SUM in IPv6 networks, 63 Troubleshooting HP SUM in IPv6 Red Hat and Novell SUSE-based Linux environments, 64 Troubleshooting HP SUM in IPv6 Windows Server 2003 environment, 63 Troubleshooting HP SUM in IPv6 Windows Server 2008 environment, 64 K keyboard support, 15 L L
troubleshooting, repository, 65 Trusted Platform Module, 12 Trusted Platform Module (TPM) Trusted Platform Module, 14 typographic conventions, 71 V version discrepancy issue, 65 virtual media access, 63 W websites product manuals, 70 Windows smart components, return codes, 41 77
