Manualshelf

Brocade Secure Fabric OS Administrator's Guide - Supporting Fabric OS v3.2.0, v4.4.0, v5.0.1, v5.1.0, 5.2.0, and 5.3.0 (53-1000244-02, June 2007)

ManualsBrandsHP ManualsComputer AccessoriesHP SN8000B 16Gb 32-port Fibre Channel Blade
71727374757677787980
Secure Fabric OS Administrator’s Guide 59
53-1000244-02
Chapter
4
Managing Secure Fabric OS
Secure Fabric OS v2.6.2, v3.2.0, v4.4.0, v5.0.1, v5.1.0, and v5.2.0 can be managed through Fabric
Manager and sectelnet. In addition, SSH (Secure Shell) is supported for Fabric OS v4.4.0, v5.0.1,
v5.1.0, and v5.2.0. When secure mode is enabled for a fabric, all Secure Fabric OS administrative
operations, all zoning commands, and some management server commands must be executed on
the primary FCS switch. For a list of the commands and related restrictions, see “Secure Fabric OS
Commands and Secure Mode Restrictions” on page 83.
In this chapter
•Viewing Secure Fabric OS Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
•Displaying and Resetting Secure Fabric OS Statistics . . . . . . . . . . . . . . . . . 62
•Managing Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
•Resetting the Version Number and Time Stamp . . . . . . . . . . . . . . . . . . . . . . 69
•Adding Switches and Merging Fabrics with Secure Mode Enabled . . . . . . . 70
•Preventing a LUN Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
•Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Viewing Secure Fabric OS Information
You can display the following Secure Fabric OS information:
• General Secure Fabric OS-related information about a fabric
• Secure Fabric OS policy sets (active and defined)
• Information about one or more specific Secure Fabric OS policies
For information about viewing the Secure Fabric OS statistics, see “Displaying and Resetting
Secure Fabric OS Statistics” on page 62.
DISPLAYING GENERAL SECURE FABRIC OS INFORMATION
You can use the secFabricShow command to display general Secure Fabric OS-related information
about a fabric.
To display general Secure Fabric OS-related information
1. Open a sectelnet or SSH session to the primary FCS switch and log in as admin.