Brocade Web Tools Administrator's Guide - Supporting Fabric OS v7.0.0 (53-1002152-01, March 2012)

Web Tools Adminstrator’s Guide 93
53-1002152-01
Configuring Port Octet Speed Combination
6
After selecting enable, the stringent and flexible radio buttons are enabled. Neither radio
buttons are selected by default.
3. Select either stringent or flexible.
4. Click Apply.
5. Close the Switch page.
6. Select Port Admin.
7. Select an F_Port or U_Port from the device tree or Port List table.
8. Click ALPA Map.
FIGURE 15 ALPA Map selection
A dialog launches listing the Port WWN to ALPA Map with the host. The Port WWN map
automatically populates.
FIGURE 16 ALPA Map dialog
9. Optional: Click Remove All to clear all of the Port WWN maps.
Configuring Port Octet Speed Combination
The Port Admin dialog provides an option to set the Port Octet Speed Combination. This option is
available only on the:
• Brocade DCX 8510-8 and DCX 8510-4 with the FC16-32 and FC16-48 port blades
• Brocade 6510