Manualshelf

Brocade Web Tools Administrator's Guide - Supporting Fabric OS v7.0.0 (53-1002152-01, March 2012)

ManualsBrandsHP ManualsComputer AccessoriesHP SN8000B 16Gb 32-port Fibre Channel Blade
151152153154155156157158159160
130 Web Tools Adminstrator’s Guide
53-1002152-01
Zone configuration and zoning database management
9
The new configuration displays in the Name list.
5. Expand the Member Selection List to view the nested elements.
The choices available in the list depend on the selection made in the View menu.
6. Select an element in the Member Selection List that you want to include in your configuration.
The right arrow becomes active.
7. Cl ic k t h e right arrow to add configuration members.
Selected members are moved to the Config Members window.
8. Repeat steps 6 and 7 to add more elements to your configuration.
9. Select Zoning Actions > Save Config to save the configuration changes.
Adding or removing zone configuration members
For information on enabling the configuration, refer to “Enabling zone configurations” on page 131.
To add or remove members of a zone configuration, perform the following steps.
NOTE
You can make changes to a configuration that is currently enabled; however, changes do not display
until you re-enable the configuration.
To configure the zone members, perform the following steps.
1. Open the Zone Admin window as described in “Opening the Zone Admin window” on page 118.
2. Select the Zone Config tab.
3. Select the configuration you want to modify from the Name list.
4. Click an element in the Member Selection list that you want to include in your configuration or
select the element in the Config Members list that you want to delete.
5. Click the right arrow to add a configuration member or the left arrow to remove a configuration
member.
6. Select Zoning Actions > Save Config to save the configuration changes.
Renaming zone configurations
The new name cannot exceed 64 characters and can contain alphabetic, numeric, and underscore
characters.
NOTE
You cannot rename the currently enabled configuration.
To rename the zone configuration, perform the following steps.
1. Open the Zone Admin window as described in “Opening the Zone Admin window” on page 118.
2. Select the Zone Config tab.
3. Select the configuration you want to rename from the Name list and click Rename.
4. In the Rename a Config dialog box, enter a new configuration name and click OK.