Brocade Web Tools Administrator's Guide - Supporting Fabric OS v7.0.0 (53-1002152-01, March 2012)

170 Web Tools Adminstrator’s Guide
53-1002152-01
Viewing fabric shortest path first routing
15
Use the Routing tab of the Switch Administration window to view and modify routing information.
Figure 33 on page 170 displays the Routing tab.
FIGURE 33 Routing tab
Viewing fabric shortest path first routing
The Routing tab of the Switch Administration window displays information about routing paths.
To view the fabric shortest path first routing, perform the following steps.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 33.
2. Select the Routing tab.
3. This step is switch-type specific:
• For the Brocade DCX 8510-8, DCX 8510-4, DCX or DCX-4S enterprise-class platforms, click a
slot number under the FSPF Route category in the navigation tree.
• For the Brocade 300, 5100, 5300, 6510, 7800 Extension switches, VA-40FC, and the
Encryption Switch, click the FSPF Route category in the navigation tree.
Configuring dynamic load sharing
The exchange-based routing policy depends on the Fabric OS dynamic load sharing feature (DLS)
for dynamic routing path selection. When this policy is in force, DLS is always enabled and cannot
be disabled.