Brocade Web Tools Administrator's Guide - Supporting Fabric OS v7.0.0 (53-1002152-01, March 2012)

70 Web Tools Adminstrator’s Guide

53-1002152-01

Creating and populating domains

3. In the Name area, assign an Admin Domain name.

You can specify a name or let the system assign the name for you.

4. In the ID area, assign an Admin Domain ID.

You can specify an ID or let the system assign the ID for you.

5. In the State area, select the Active check box to activate the Admin Domain when you finish

creating it.

NOTE

Clear the Active check box if you want the Admin Domain deactivated when you finish creating

it.

6. Click Next.

7. In t h e Membership area, assign members to the Admin Domain by selecting them in the

Available Members section and clicking Add, Add Ports, or Add Devices as described below:

• Select a switch, port, or device in the Available Members tree and click Add to add the

selected element.

Alternatively, you can press the Insert key to add your selections.

• Select a switch or slot and click Add Ports to add all of the ports in the selected switch or

slot.

• Select a switch, slot, or port and click Add Devices to add all of the devices for the selected

element.

8. Optional: Click Manual to add offline devices.

NOTE

To add ports or other switches in the fabric, launch the Add Member wizard by clicking the

Manual button.

9. Click Next.

The wizard displays a summary of the Admin Domain. Read the summary to verify that the

Admin Domain setup is correctly.

10. Click Finish to close the wizard.

11. Click Save to save the new Admin Domain configuration to persistent storage.

12. Click Apply to enforce the new Admin Domain configuration as the effective configuration.

Adding ports or switches to the fabric

To add ports or switches to the fabric, perform the following steps.

1. From the Create Admin Domain wizard, click Manual.

The Add Member window displays.

2. Select Port and enter the member ID in the Member field using the Domain Index (D,I) format.

3. Click Apply to enforce the added members, and then click OK to accept the changes.